MELİN ŞAHİN. Associate Professor. Department of Aerospace Engineering Middle East Technical University 06800, Ankara, TURKEY

Transkript

1 MELİN ŞAHİN Associate Professor Department of Aerospace Engineering Middle East Technical University 06800, Ankara, TURKEY Voice : +90 (312) Fax : +90 (312) m.sahin@metu.edu.tr Web Page : EDUCATIONAL BACKGROUND : Postdoctoral Research Fellow University of Southampton School of Engineering Sciences, Department of Ship Science and Winchester School of Art, Textile Conservation Centre Research Topic: Investigation of Potential Techniques for Damage Monitoring in Historic Tapestries Full details in Statement of Research Interest section : Doctor of Philosophy (PhD.) University of Southampton School of Engineering Sciences Lightweight and Composite Structures Research Group Thesis Title: Damage Identification in Beam-like Structures by Vibration-based Analysis and Artificial Neural Networks Full details in Statement of Research Interest section : Master of Science (MSc.) Middle East Technical University Department of Aeronautical Engineering Thesis Title: Wing Structural Characteristics of a Medium-Range Transport Aircraft Full details in Statement of Research Interest section : Bachelor of Science (BSc.) Middle East Technical University Department of Aeronautical Engineering 1/13

2 WORK EXPERIENCE December Present Lecturer (Associate Professor Dr.) Middle East Technical University, Department of Aerospace Engineering July December 2012 Lecturer (Assistant Professor Dr.) Middle East Technical University, Department of Aerospace Engineering Oct 2005-June 2006 Instructor (Dr.) Middle East Technical University, Department of Aerospace Engineering June 2004-May 2005 Postdoctoral Research Fellow (Dr.) University of Southampton, School of Engineering Sciences and Winchester School of Art, Textile Conservation Centre Monitoring degradation in materials by contact (i.e. fibre optic strain sensors) and non-contact (i.e. electronic speckle pattern shearing interferometry) techniques. Oct 2000-May 2004 Research Assistant University of Southampton, School of Engineering Sciences Tutorial and laboratory demonstrations for engineering undergraduate students at University of Southampton with the subjects of mechanics of material, dynamics, thermodynamics and solid mechanics. Oct 1996-Sept 2000 Research Assistant (4-year full time employment) Middle East Technical University, Department of Aeronautical Engineering Tutorial and laboratory demonstrations for engineering undergraduate students at Middle East Technical University with the subjects of aeronautical structures, static, dynamics, mechanical vibrations, finite element modelling and analysis. Working as part of the team of researchers on project of finite element design and dynamic analysis of medium-range transport aircraft wing. June 1993-Aug 1993 Summer Practice II (Aeronautical Applications) Turkish Aerospace Industries Inc. (TAI), Ankara, Turkey Research and Development Department Centre Management and organisation of aeronautical industries. Aircraft design, assembly and manufacturing. June 1992-July 1992 Summer Practice I (Aeronautical Applications) 1 st Air Supply and Maintenance Centre, Eskisehir, Turkey Assembly of mechanical aircraft parts, maintenance of aircraft, quality control of relevant parts and aircraft motor testing. 2/13

3 STATEMENT OF RESEARCH INTEREST Postdoctoral Research: Title: Investigation of Potential Techniques for Damage Monitoring in Historic Tapestries Research Abstract: Tapestries and other large wall hangings are of major historic and cultural significance and form an integral part of the interior of many historic houses. They are large and heavy and while they are on continuous display damage may be caused, not only because of their vulnerability to the environment but also through the stress imposed by their own weight. Textile conservators understand the chemistry of fibres and dyes and the way they interact with the environment. They routinely monitor and control the environment to enhance the long-term preservation of tapestries and other artefacts. Although they are experienced in visually assessing textiles for evidence of their inherent response to the stress caused by hanging, they have never been able to quantify this damage. The development of effective monitoring techniques will enable areas of degradation to be identified before it is visually apparent that damage is occurring. The development of such techniques will mean that the optimum time for conservation treatment can be predicted and different methods of treatment can be evaluated. Philosophy of Doctorate (PhD) Research: Title: Damage Identification in Beam-like Structures by Vibration-based Analysis and Artificial Neural Networks Research Abstract: Laminated composites and sandwich structures are being increasingly used in different engineering applications, especially in aeronautical, marine and offshore structures where high stiffness, lightweight, good corrosion resistance and temperature stability are the primary issues. During their service life, these structures experience extreme loading and harsh environmental condition leading structural damage that significantly reduces the mechanical strength and causes an overall performance degradation in the structure. Therefore, localisation and quantification of the damage in real time so as to maintain the performance of the structure is one of the promising research areas in engineering applications. Since the determination of the severity and the location of the damage is an inverse, non-linear and non-unique problem, an intelligent algorithm is needed to perform the damage detection analysis. This research aims to develop a damage detection algorithm, which uses vibration-based analysis data obtained from beam-like structure to locate and quantify the damage by using artificial neural networks. The inputs and the corresponding outputs required to train the neural network are obtained from the finite element analyses for different vibration modes of the beams. The designed multi-layer feed-forward back-propagation neural networks are trained by using different damage scenarios. After validation of the neural networks, new damage cases are introduced and neural networks are tested for the location and severity predictions. The results from the neural network depict that severity and location of the damage can be predicted by using as input the global (natural frequencies) and the local (strain or curvature mode shapes) dynamic behaviour of the structure. Master of Science (MSc) Research: Title: Wing Structural Characteristics of a Medium-Range Transport Aircraft Research Abstract: The analysis of aircraft structures is one of the most important and challenging issues that an aeronautical engineer faces. The methods of structural analysis are two types, namely analytical and numerical methods. Analytical methods provide closed-form solutions only at certain relatively simple cases and practically cannot be used in the analysis of complex structures. The finite element method, which is a numerical procedure, is most widely used to solve various structural mechanics problems as a powerful and accurate analysis tool. In this thesis, wing structural characteristics of a medium-range transport aircraft are investigated by using a finite element package called I-DEAS (Integrated Design Engineering and Analysis Software). The three dimensional solid model of the wing is constructed and thereafter by using one and two-dimensional finite elements, a mixed mesh is generated on the model. After the application of the boundary conditions, the dynamic and static analyses are performed and the solutions for the wing are obtained for with and without fuel cases. The results are presented in terms of the natural frequencies and mode shapes for the dynamic analysis and the displacements and stresses for the static analysis. These results are further analysed in order to find the effect of the fuel and to investigate the behaviour of the wing. 3/13

4 TECHNICAL PUBLICATIONS Science Citation Index Onat, C., Sahin, M. and Yaman,Y. Fractional Controller Design for Suppressing Smart Beam Vibrations. Aircraft Engineering and Aerospace Technology, 2012, 84(4): Sahin, M. and Aridogan, M.U. Performance Evaluation of Piezoelectric Sensor/Actuator on Active Vibration Control of a Smart Beam. Proceedings of the Institution of Mechanical Engineers, Part I, Journal of Systems and Control Engineering, 2011, 225(5): Sahin, M., Karadal, F.M., Yaman,Y, Kircali, O.F., Nalbantoglu, V., Ulker, F.D., and Caliskan, T. Smart structures and their applications on active vibration control: Studies in the Department of Aerospace Engineering, METU, Journal of Electroceramics, 2008, 20(3-4): Kircali, O.F., Yaman,Y, Nalbantoglu, V., Sahin, M., Karadal, F.M., and Ulker, F.D. Spatial control of a smart beam, Journal of Electroceramics, 2008, 20(3-4): Sahin, M. and Shenoi, R.A. Vibration-based Damage Identification in Beam-like Composite Laminates. Proceeding of Institute of Mechanical Engineers, Part C, Journal of Mechanical Engineering Science, 2003, 217(6): Sahin, M. and Shenoi, R.A. Quantification and Localisation of Damage in Beam-like Structures by using Artificial Neural Networks with Experimental Validation. Engineering Structures, 2003, 25(14), Yaman, S.D., Sahin, M., and Aydin, C. Finite Element Analysis of Strength Characteristics of Various Resin Based Restorative Materials in Class V Cavities. Journal of Oral Rehabilitation, 2003, 30(6): Yaman, S.D., Karacaer, O., and Sahin, M. Stress Distribution of Post-Core Applications in Maxillary Central Incisors. Journal of Biomaterials Applications, 2004, 18(3): Science Citation Index (Technical Note) Dawood, T.A., Shenoi, R.A., Sahin, M. A procedure to embed fibre Bragg grating strain sensors into GFRP sandwich structures, Composites: Part A, Applied Science and Manufacturing, 2007, 38, Total Citations to Technical Publications: 53 (SCIE) (till 2012) Others Book: Sahin, M. Damage Identification in Beam-like Structures via Vibration-based Analyses and Artificial Neural Networks, VDM Verlag Dr. Müller Publications, (ISBN-13: , ISBN-10: , EAN: ), [PhD. Dissertation ] 4/13

5 Book Chapter: Kircali, O.F., Yaman, Y., Nalbantoglu, V. and Sahin, M. Active Vibration Control of a Smart Beam by Using A Spatial Approach, New Developments in Robotics, Automation and Control, I-TECHONLINE, I-Tech Education and Publishing, 2008, Sahin, M., Chambers, A., Dokos, L., Dulieu-Barton, J.M., Earl, J.S., Eastop, D., and Lennard, F. Understanding Engineering Techniques and their Potential in Conservation, in Tapestry Conservation: Principles and Practice, eds. Lennard, F. and Hayward, M., Elsevier Scientific Publications. (formerly Butterworth-Heinemann), 2006, Conferences: International Pedramasl, N., Sahin, M., Acar, E., Multi-Objective Optimization of Transducers used in Modal Test of an Unmanned Aerial Vehicle Wing, International Conference on Advances in Vibrations, Vibrations2015, 30 March - 01 April 2015, Port, Portugal. Pedramasl, N., Sahin, M., Acar, E., Multi-Objective Optimization of Types, Numbers and Locations of Transducers Used in Modal Test of a Fin-Like Structure, Tokyo International Conference on Engineering and Applied Science, TICEAS 2014, December 2014, Tokyo, Japan. Amer, C. and Sahin, M., Structural Analysis of a Composite Wind Turbine Blade, World Academy of Science, Engineering and Technology, WASET 2014, Istanbul, Turkey. Arslan, P., Kalkan, U., Tiras, H., Tuncoz, I.O., Yang, Y., Gurses, E., Sahin, M., Ozgen, S., Yaman, Y., Structural Analysis of an Unconventional Hybrid Control Surface of a Morphing, Wing, ICAST2014: 25th International Conference on Adaptive Structures and Technologies, October 2014, The Hague, Netherlands Arslan, P., Kalkan, U., Tiras, H., Tuncoz, I.O., Yang, Y., Gurses, E., Sahin, M., Ozgen, S., Yaman, Y., A Hybrid Trailing Edge Control Surface Concept, DeMEASS-VI, 6th Conference for Design, Modelling and Experiments of Advanced Structures and Systems, May 2014, Ede-Wageningen, Netherlands. Avsar, A. L. and Sahin, M. Energy Harvesting Studies on Fin-like Structure via Piezoelectric Material, AIAC, 7th Ankara International Aerospace Conference, September 2013, METU, Ankara, Turkey. Onat, C., Sahin, M., Yaman, Y. Optimal Control of a Smart Beam by Using a Luenberger Observer, ICEAF III, 3rd International Conference of Engineering Against Failure, June 2013, Kos, Greece. Aktasoğlu, S. and Sahin, M. Damage Detection in Beam-like Structures via Combined Genetic Algorithm and Nonlinear Optimisation, The Eleventh International Conference on Computational Structures Technology, CST 2012, 4-7 September 2012, Dubrovnik, Croatia. Kahraman, E. and Sahin, M. Extracting Modal Parameters of a Fin-Like Structure via Operational Modal Analysis, AIAC, 6th Ankara International Aerospace Conference, September 2011, METU, Ankara, Turkey. Onat, C., Sahin, M., Yaman, Y. An Experimental Performance Evaluation for the Suppression of Vibrations of the Second Mode of a Smart Beam, AIAC, 6th Ankara International Aerospace Conference, September 2011, METU, Ankara, Turkey. 5/13

6 Onat, C., Sahin, M., Yaman, Y. Performance Analysis of a Fractional Controller Developed for the Vibration Suppression of a Smart Beam, 5th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART 11), Conference CD: , Saarland University, 6-8 July 2011, Saarbrücken, Germany. Onat, C., Sahin, M., Yaman, Y. Active Vibration Suppression of a Smart Beam by using a Fractional Control, 2nd International Conference of Engineering Against Fracture (ICEAF II) June 2011, Mykonos, Greece. Onat, C., Sahin, M., Yaman, Y. Active Vibration Suppression of a Smart Beam by using an LQG Control Algorithm, 2nd International Conference of Engineering Against Fracture (ICEAF II) June 2011, Mykonos, Greece. Kahraman, E. and Sahin, M. Dynamic Property Estimation of Lightweight Aircraft Structures via Operational Modal Analysis in Wind Tunnel and In-Vacuo Conditions, 4th International Operational Modal Analysis Conference, (IOMAC'11), 9-11 May 2011, Istanbul, Turkey. Onat, C., Sahin, M., Yaman, Y. Active Vibration Suppression of a Smart Beam via PI λ D µ Control, IWPMA 2010, International Workshop on Piezoelectric Materials and Applications in Actuators, October 2010, Antalya, Turkey. Sahin, M. Vibration-based Damage Identification in Sandwich Beams using Artificial Neural Networks, The Tenth International Conference on Computational Structures Technology, CST 2010, September 2010, Valencia, Spain. Sahin, M., Sakarya, E., Unlusoy, L., Insuyu, E.T., Seber, G., Ozgen, S., Yaman, Y. Design, Analysis and Experimental Modal Testing of a Mission Adaptive Wing of an Unmanned Aerial Vehicle, UVW2010, International Unmanned Vehicle Workshop, Paper ID: 10, June 2010, Turkish Air Force Academy, Istanbul, Turkey. Ozgen, S., Yaman, Y., Sahin, M., Seber, G., Sakarya, E., Unlusoy, L., Insuyu, E.T., Bayram, G., Uludag, Y., Yilmaz, A. Morphing Air Vehicle Concepts, UVW2010, International Unmanned Vehicle Workshop, Paper ID: 5, June 2010, Turkish Air Force Academy, Istanbul, Turkey. Arıdoğan, U., Şahin, M., Nalbantoğlu, V., Yaman, Y., Active Vibration Suppression of A Smart Beam via Self-Sensing Piezoelectric Actuator. AIAC, 5th Ankara International Aerospace Conference, August 2009, METU, Ankara, Turkey. Seber, G., Sakarya, E., İnsuyu, E.T., Özgen, S., Şahin, M., Yaman, Y. Structural Modeling and Aeroelastic Analysis of Variable Camber Wings. AIAC, 5th Ankara International Aerospace Conference, August 2009, METU, Ankara, Turkey. Seber, G., Sakarya, E., Insuyu, E.T., Sahin, M., Ozgen, S., Yaman, Y. Evaluation of a Camber Morphing Concept Based on Controlled Flexibility, IFASD 2009, International Forum on Aeroelasticity and Structural Dynamics 2009, June 2009, Seattle, Washington, USA. Karadal, F.M., Nalbantoglu, V., Sahin, M., Seber, G., Kircali, O.F., Yaman, Y. Active Flutter Control of a Smart Fin, ICAST 2008, 19th International Conference on Adaptive Structures and Technologies, 6-9 October 2008, Ascona, Switzerland. Karadal, F.M., Seber, G., Sahin, M., Nalbantoglu, V., Yaman, Y. State Space Representation of Smart Structures Under Unsteady Aerodynamic Loading, AIAC, 4th Ankara International Aerospace Conference, September 2007, METU, Ankara, Turkey. Dulieu-Barton, J.M., Sahin, M., Lennard, F.L., Eastop, D.D., Chambers, A.R. Assessing the Feasibility of Monitoring the Condition of Historic Tapestries Using Engineering Techniques, Seventh International Conference On Damage Assessment of Structures DAMAS th - 27th June 2007, Torino, Italy. 6/13

7 Kircali, O.F., Yaman,Y, Nalbantoglu, V., Sahin, M., Karadal, F.M. Application of Spatial H Control Technique for Active Vibration Control of A Smart Beam, ICINCO 2007, 4th International Conference on Informatics in Control, Automation and Robotics, Paper C3-425, May 2007, Angers, France. Sahin, M. Identification of Damage In Sandwich Beams by Using Vibration-Based Analysis and Artificial Neural Networks. ICMSAO 07 Second International Conference On Modeling, Simulation And Applied Optimization, March 24 27, 2007, The Petroleum Institute, Abu Dhabi, UAE. Kircali, O.F., Yaman, Y., Nalbantoglu, V., Sahin, M., Karadal, F. M., Ulker, F.D. Spatial Control of a Smart Beam, IWPMA 2006, 3rd International Workshop on Piezoelectric Materials and Applications in Actuators, June 2006, Anadolu University, Eskisehir, Turkey. Sahin, M., Yaman, Y., Nalbantoglu, V., Karadal, F.M., Kircali, O.F., Ulker, F.D., Caliskan, T. Smart Structures and Their Applications on Active Vibration Control: Studies in the Department of Aerospace Engineering, METU, IWPMA 2006, 3rd International Workshop on Piezoelectric Materials and Applications in Actuators, June 2006, Anadolu University, Eskisehir, Turkey. Dawood, T.A., Shenoi, R.A., Veres, S.M., Sahin, M. and Gunning, M.J. Damage Characterisation in FRP Sandwich Beams using a Wavelet based Multifractal Approach. Second European Workshop on Structural Health Monitoring, Proceeding of the Second European Workshop. Forum am Deutschen Museum, Munich, Germany. July 7-9, 2004, Dawood, T.A., Shenoi, R.A., Veres, S.M., and Sahin, M. Low Level Damage Characterisation in FRP Sandwich Beams using the Lipschitz Exponent. Second European Workshop on Structural Health Monitoring, Proceeding of the Second European Workshop. Forum am Deutschen Museum, Munich, Germany. July 7-9, 2004, Dawood, T.A., Shenoi, R.A., Veres, S.M., Sahin, M. and Gunning, M.J. Damage Detection in a Sandwich Composite Beam Using Wavelet Transforms. Smart Structures and Materials 2003: Modeling, Signal Processing, and Control, Proceedings of SPIE. 3-6 March 2003, San Diego, California, USA, Vol. 5049, Sahin, M. and Shenoi, R.A. Damage Detection in FRP Laminated Beams Using Neural Networks. First European Workshop on Structural Health Monitoring, Proceeding of the First European Workshop. Ecole Normale Superieure, Cachan (Paris), France. July 10-12, 2002, Paper (In Non-Technical Journal): Dulieu-Barton, M. J. Dokos, L., Eastop, D., Lennard, F., Chambers, A. and Sahin, M. Deformation and strain measurement techniques for the inspection of damage in works of art Reviews in Conservation, Number 6, 2005, Conferences: National (all in Turkish) Arslan, P., Kalkan, U., Tıraş, H., Tunçöz, İ.O., Yang, Y., Gürses, E., Özgen, S., Şahin, M. Yaman, Konvansiyonel Olmayan İki Farklı Kontrol Yüzeyinin Yapısal Özelliklerinin Değerlendirilmesi ve Karşılaştırılması, UHUK2014, V. Ulusal Havacılık ve Uzay Konferansı, Eylül 2014, Erciyes Üniversitesi, Kayseri, Konferans CD: UHUK /13

8 Tunçöz, İ.O., Yang, Y., Özgen, S., Gürses, E., Şahin, M. Yaman, Konvansiyonel ve Konvansiyonel Olmayan Kontrol Yüzeylerine Sahip İnsansız Hava Aracı Kanatlarının Aerodinamik Özelliklerinin Değerlendirilmesi, SAVTEK2014, 7. Savunma Teknolojileri Kongresi, Haziran 2014, ODTÜ, Ankara, Konferans CD: Arslan, P., Kalkan, U., Tıraş, H., Tunçöz, Gürses, E., Özgen, S., Şahin, M. Yaman, Konvansiyonel ve Konvansiyonel Olmayan Kontrol Yüzeylerine Sahip İnsansız Hava Aracı Kanatlarının Ağırlıklarının İncelenmesi, SAVTEK2014, 7. Savunma Teknolojileri Kongresi, Haziran 2014, ODTÜ, Ankara, Konferans CD: Arslan, P., Kalkan, U., Tıraş, H., Tunçöz, İ.O., Yang, Y., Özgen, S., Şahin, M., Gürses, E., Yaman, Bir İnsansız Hava Aracının Konvansiyonel Olmayan Esnek Kontrol Yüzeylerinin Yapısal Analizi ve İç Yapısının Tasarımı, HİTEK2014, 3. Havacılıkta İleri Teknolojiler Konferansı, Haziran 2014, HHO İstanbul. Avşar, A. L., Şahin, M. Hava Yapıları Üzerinden Farklı Tip Piezoelektrik Malzemeler Kullanılarak Enerji Hasatı Çalışmaları, UHAT2013, II. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, Kasım 2013, Hava Teknik Okullar Komutanlığı - Hava Astsubay Meslek Yüksek Okulu, İzmir. Arslan, P., Kalkan, U., Yang, Y., Özgen, S., Şahin, M. Gürses, E., Yaman, Y. Büyük Oranda Şekil Değiştirebilen Kanat Yüzeylerinin Aerodinamik Yükler Altında Davranışları, UHAT2013, II. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, Kasım 2013, Hava Teknik Okullar Komutanlığı - Hava Astsubay Meslek Yüksek Okulu, İzmir. Tıraş, H., Tunçöz, İ. O., Gürses, E., Şahin, M. Özgen, S., Yaman, Y. Büyük Oranda Şekil Değiştirebilen Kontrol Yüzeylerinin Yapısal Özelliklerinin Değerlendirilmesi, UHAT2013, II. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, Kasım 2013, Hava Teknik Okullar Komutanlığı - Hava Astsubay Meslek Yüksek Okulu, İzmir. Yaman, Y., Özgen, S., Şahin, M., Gürses, E. Büyük Oranda Şekil Değiştirebilen Kanat/ Kontrol Yüzeylerinin Uçuştaki Etkileri ", UHAT2012, I. Ulusal Havacılık Teknolojisi ve Uygulamaları Kongresi, Aralık 2012, Ege Üniversitesi, Ege Meslek Yüksek Okulu, İzmir. Aktaşoğlu, S., Şahin, M. Kiriş Benzeri Yapılarda Testere Kesiği Tipi Hasarların Birleşik Genetik Algoritma ve Lineer Olmayan Optimizasyon İle Tespiti, IV. Ulusal Havacılık Ve Uzay Konferansı, Eylül 2012, Hava Harp Okulu, İstanbul. Avşar, A. L., Şahin, M. Hava Aracının Üzerinden Titreşim Kaynaklı Enerji Hasatı Çalışmaları, IV. Ulusal Havacılık Ve Uzay Konferansı, Eylül 2012, Hava Harp Okulu, İstanbul. Körpe, D. S., Ünlüsoy, L., Şahin, M., Özgen, S. Yaman, Y. Büyük Oranda Şekil Değiştirebilen Kanatların Ön Tasarım Sürecinde Aerodinamik ve Yapısal Analizlerinin Eşlenmesi, IV. Ulusal Havacılık Ve Uzay Konferansı, Eylül 2012, Hava Harp Okulu, İstanbul. Avşar, A. L., Şahin, M. Piezoelektrik Malzemeler Yardımıyla Enerji Hasatı, SAVTEK 2012, 6. Savunma Teknolojileri Kongresi, Haziran 2012, ODTÜ, Ankara, Altuğ, M. N., Şahin, M. Bir Jet Eğitim Uçağı Kokpitinin Yapısal Analizleri, SAVTEK 2012, 6. Savunma Teknolojileri Kongresi, Haziran 2012, ODTÜ, Ankara, Aktaşoğlu, S., Şahin, M. Kiriş Benzeri Yapılarda Birleşik Genetik Algoritma ve Lineer Olmayan Optimizasyon İle Hasar Tespiti, SAVTEK 2012, 6. Savunma Teknolojileri Kongresi, Haziran 2012, ODTÜ, Ankara, Ünlüsoy, L., Körpe, D. S., Şahin, M., Özgen, S. Yaman, Y. Büyük Oranda Şekil Değiştirebilen Kanatların Aerodinamik ve Yapısal Tasarımı, SAVTEK 2012, 6. Savunma Teknolojileri Kongresi, Haziran 2012, ODTÜ, Ankara, /13

9 Ünlüsoy, L., Yaman, Y., Şahin, M., Özgen, S., Seber, G., İnsuyu, E. T., Sakarya, E. Göreve Uyumlu Kanatlara Sahip Bir İnsansız Hava Aracının Uçuş Testleri ve Yapısal Geliştirilmesi, UMTS2011, 15. Ulusal Makina Teorisi Sempozyumu, Niğde Üniversitesi, Haziran 2011, Niğde, Bildiriler Kitabı: 01-10, ISBN: Onat, C., Şahin, M., Yaman, Y. Akıllı Bir Kirişin Titreşimlerinin Aktif Denetimi İçin PIλDµ ve PID Denetçilerin Değerlendirilmesi, UMTS2011, 15. Ulusal Makina Teorisi Sempozyumu, Niğde Üniversitesi, Haziran 2011, Niğde, Bildiriler Kitabı: , ISBN: Yaman, Y., Özgen, S., Şahin, M., Seber, G., Sakarya, E., İnsuyu, E. T., Ünlüsoy, L. ODTÜ'de Yapılan İnsansız Hava Aracı Çalışmaları, TMMOB Makina Mühendisleri Odası, VI. Ulusal Uçak, Havacılık ve Uzay Mühendisliği Kurultayı, Mayıs 2011, Eskişehir, Bildiriler Kitabı: TMMOB, MMO Yayın No: E/2011/553, ISBN: Şahin, M., İnsuyu, E.T., Sakarya, E. Ünlüsoy, L., Özgen, S., Seber, G., ve Yaman, Y. Göreve Uyumlu Kanatları Olan Bir İnsansız Hava Aracı Gövdesinin Yapısal Tasarımı ve Analiz, SAVTEK2010, 5. Savunma Teknolojileri Kongresi, Bildiriler Kitabı: , ODTÜ, Ankara, Şahin, M., Ünlüsoy,L., Sakarya, E., İnsuyu, E.T., Seber, G., Özgen, S., ve Yaman, Y. Göreve Uyumlu Bir İnsansız Hava Aracı Kanadının Yapısal Modellenmesi ve Deneysel Doğrulanması, SAVTEK2010, 5. Savunma Teknolojileri Kongresi, Bildiriler Kitabı: , ODTÜ, Ankara, Yaman, Y., Özgen, S., Şahin, M., Seber, G., Nalbantoğlu, V., Sakarya, E., İnsuyu, E.T., ve Ünlüsoy, L. Göreve Uyumlu Kanatlara Sahip bir İnsansız Hava Aracının Tasarımı, UMTS2009, 14. Ulusal Makina Teorisi Sempozyumu, Bildiriler Kitabı: , ODTÜ Kuzey Kıbrıs Kampüsü, Güzelyurt, KKTC, Arıdoğan, U., Şahin, M., Nalbantoğlu, V., ve Yaman, Y., Piezoelektrik Yamaların Akıllı Bir Kirişin Titreşim Kontrolünde Algılayıcı ve Uyarıcı Olarak Kullanılması, UMTS2009, 14. Ulusal Makina Teorisi Sempozyumu, Bildiriler Kitabı: , ODTÜ Kuzey Kıbrıs Kampüsü, Güzelyurt, KKTC, Arıdoğan, U., Şahin, M., Nalbantoğlu, V., ve Yaman, Y. Piezoelektrik Yamaların Akıllı Bir Kirişin Titreşim Özelliklerinin Bulunmasında Algılayıcı Olarak Kullanılması, XVI. Ulusal Mekanik Kongresi, Erciyes Üniversitesi, Kayseri, Yaman, Y., Özgen, S., Şahin, M., Seber, G., Nalbantoğlu, V., Sakarya, E., İnsuyu, E.T., Ünlüsoy, L., Bayram, G., Uludağ, Y. ve Yılmaz, A. ODTÜ de Sürdürülen İnsansız Hava Aracı Çalışmaları, TMMOB Makina Mühendisleri Odası, V. Ulusal Uçak, Havacılık ve Uzay Mühendisliği Kurultayı, TMMOB, MMO Yayın No :E/2009/497-1, ISBN: , Bildiriler Kitabı: 87-93, Eskişehir, Seber, G., İnsuyu, E. T., Özgen, S., Şahin, M. ve Yaman, Y. Değişken Kambura Sahip NACA4412 Kanat Kesitinin 2- Boyutlu Aerodinamik Analizi, 2. UHUK, II. Ulusal Havacılık ve Uzay Konferansı, Konferans CD: UHUK , İTÜ, İstanbul, Seber, G., Şahin,M., Özgen, S. Nalbantoğlu, V. ve Yaman, Y. Göreve Uyumlu Kanat Tasarım ve Geliştirme Çalışmaları, SAVTEK 2008, 4. Savunma Teknolojileri Kongresi, Haziran 2008, ODTÜ, Ankara, Karadal, F. M., Şahin, M., Kırcalı, Ö.F., Nalbantoğlu, V. ve Yaman Y., Akıllı bir Kirişin Statik Aerodinamik Yükler Altındaki Davranışı, UMTS 2007, 13. Ulusal Makina Teorisi Sempozyumu, Bildiriler Kitabı: , Cumhuriyet Üniversitesi, Sivas, /13

10 Kırcalı, Ö. F., Yaman,Y., Nalbantoğlu, V., Şahin, M. ve Karadal, F. M. Akıllı bir Kirişin Titreşim Kontrolunda Uzamsal ve Noktasal Denetçilerin Karşılaştırılması, 1. UHUK, 1. Ulusal Havacılık ve Uzay Konferansı, ODTÜ, Ankara, Şahin, M. Kompozit ve Sandviç Kirişlerdeki Hasar Şiddetinin Titreşim Bazlı Analizler ve Yapay Sinir Ağları ile Tespiti. 1. UHUK, 1. Ulusal Havacılık ve Uzay Konferansı, ODTÜ, Ankara, Şahin, M. Kiriş Benzeri Yapılarda Titreşim Temelli Analizler ve Yapay Sinir Ağları ile Hasar Tespiti. ASYU 2006, Akıllı Sistemlerde Yenilikler ve Uygulamaları Sempozyumu, İstanbul, Kırcalı, Ö. F., Yaman, Y., Nalbantoğlu, V. Şahin, M., Karadal, F. M. ve Ülker, F. D. Akıllı bir Kirişin Uzamsal Sistem Modelinin Elde Edilmesi, HaSeM 06, Kayseri VI. Havacılık Sempozyumu, Bildiriler Kitabı: , Erciyes Üniversitesi/ TOBB-ETÜ, Nevşehir, Kırcalı, Ö. F., Yaman,Y., Nalbantoğlu, V., Şahin, M. ve Karadal, F. M. Akıllı bir Kirişin Varsayılan Biçimler Metodu ile Uzamsal Sistem Modelinin Elde Edilmesi ve Elde Edilen Modelin İyileştirilmesi, HaSeM 06, Kayseri VI. Havacılık Sempozyumu, Bildiriler Kitabı: , Erciyes Üniversitesi/ TOBB-ETÜ, Nevşehir, Paper (In Magazine, in Turkish): S. Özgen, G. Seber, M. Şahin, Y. Yaman, G. Bayram, Y. Uludağ, A. Yılmaz, Şekil Değiştiren Uçaklar Havacılıkta Yeni Bir Devrim Yaratabilir mi? Savunma ve Havacılık Dergisi, ISSN: , Cilt:22/126, Sayı: 2008/02, Sayfa: , Özgen, S., Yaman, Y., Bayram, G., Şahin, M., Yılmaz, A., Uludağ, Y. Şekillendirilebilir Hava Aracı Konseptleri, Savunma Sanayii Gündemi, ISSN: , Cilt: 2010/2, Sayı: 12, Sayfa: 59-65, Yaman, Y., Özgen, S., Şahin, M., Seber, G., Ünlüsoy, L., İnsuyu, E. T., Sakarya, E. Göreve Uyumlu Kumanda Yüzeylerinin Geliştirilmesi. Savunma ve Havacılık Dergisi, ISSN: , Cilt:25/43, Sayı: 2011/01, Sayfa: , PROJECT WORK International FP7-AAT-2012-RTD-1, AAT : Aerostructures, Project No: CHANGE, Combined morphing Assessment software using flight Envelope data and mission based morphing prototype wing development FP7, (On going project, Starting Date: , Duration: 36 months) - Project Partner, Researcher. AVT/T-133 Development and Verification of Various Strategies for the Active Vibration Control of Smart Aerospace Structures Subjected to Aerodynamic Loading Canada-Turkey joint project, Researcher. (Completed, Starting Date: , End Date: Duration: 24 months + 6 months of extension) - Project Partner, Researcher. 10/13

11 National TUBITAK - 112M845 (The Scientific and Technological Research Council of Turkey) Optimization of Types, Numbers and Locations of Sensors and Actuators used in Modal Analysis of Aircraft Structures using Genetic Algorithm, (On going project, Starting Date: , Duration: 24 months) - Director. TUBITAK - 107M103 (The Scientific and Technological Research Council of Turkey) Aeroservoelastic Analysis of the Effects of Camber and Twist on Tactical Unmanned Aerial Vehicle Mission-Adaptive Wings, (Completed, Starting Date: , End Date: , Duration: 36 months) - Researcher. BAP (Scientific Research Projects of Middle East Technical University), Active Vibration Suppression of Aerospace Structures with Piezoelectric Materials via Novel Adaptive Controllers, (On going project, Starting Date: , End Date: , Duration: 24 months) - Director. BAP (Scientific Research Projects of Middle East Technical University), Vibration-based Energy Harvesting on Aircraft Structures via Piezoelectric Materials, (Completed, Starting Date: , End Date: , Duration: 24 months) - Director. BAP (Scientific Research Projects of Middle East Technical University), Prediction and Verification of Dynamic Properties of Aerospace Structures via Experimental Modal Testing, (Completed, Starting Date: , End Date: , Duration: 24 months) - Director. TECHNICAL INTERESTS Structural dynamics and analysis Light-weight and composite/sandwich structure applications Structural health monitoring and damage identification via vibration-based signatures Active vibration control Smart structures Morphing aerospace structures Biomaterial applications THESIS SUPERVISED [Department of Aerospace Engineering, METU] Aktaşoğlu, S. Damage Detection in Beam-like Structures via Combined Genetic Algorithm and Non-Linear Optimisation, Middle East Technical University, February, Altuğ, M. N. Structural Analysis of a Jet Trainer Cockpit, Middle East Technical University, February, Kahraman, E. Investigation of the Dynamic Properties of Plate-like Structures, Middle East Technical University, September, /13

12 Arıdoğan, M. U. Performance Evaluation of Piezoelectric Sensor/Actuator on Investigation of Vibration Characteristics and Active Vibration Control of A Smart Beam, Middle East Technical University, June, (Co-Superviser: Dr. Volkan Nalbantoğlu (Aselsan)) İnsuyu, E. T. Aero-Structural Desin and Analysis of An Unmanned Aerial Vehicle and Its Mission Adaptive Wing, Middle East Technical University, February, TEACHING [Department of Aerospace Engineering, METU] Graduate Level: AE 568 Experimental Analysis of Vibrating Structures [2008, 2009, 2010, 2011: Spring Semester] Undergraduate Level: AE 261 Statics [2005, 2006, 2007, 2009, 2012: Fall Semesters] AE 262 Dynamics [2008, 2011: Spring Semesters] AE 264 Strength of Materials [2005, 2006, 2007, 2009, 2010: Spring Semesters] AE 361 Applied Elasticity [2007, 2008: Fall Semesters] AE 463 Mechanical Vibrations [2007, 2008, 2010, 2011, 2012, 2013: Fall Semesters] MECH 208 Dynamics [2009: Summer School] TECHNICAL PRESENTATIONS Sahin, M. and Dawood, T.A Damage Identification in FRP Composite Structures - Monitoring and Management of FRP Structures, Organised by NGCC, Concrete Society and CoSACNet, BRE, Watford, UK, February 19 th, Sahin, M. Damage Detection in FRP Structures using Artificial Neural Networks - Access for Industry: A Student/Industry Showcase, National Maritime Museum, Greenwich, London, UK, February 27 th, CONFERENCES AND COURSES ATTENDED 4 th International Conference on Damage Assessment of Structures (DAMAS2001), Cardiff, Wales, UK, June 25 th 28 th, Pre-conference course on Health Monitoring Techniques: An overview. First European Workshop on Structural Health Monitoring, Proceeding of the First European Workshop, Ecole Normale Superieure, Cachan (Paris), France. July 9 th, /13

13 Short Course on Vibration Control in ISVR at University of Southampton, UK, March 24 th 28 th, th International Conference on Damage Assessment of Structures (DAMAS2003), Southampton, UK, July 1 st 3 rd, st International Summer Academy on Structural Assessment Monitoring and Control, (SAMCO) Robinson College, Cambridge University, UK, July 14 th 18 th, rd SYSWIND Summer School on Control, Health Monitoring and Wind Energy/Power Grid Energy, University of Patras, Greece, July 16-20, CONFERENCE ORGANIZATION AIAC 2007, The 4th Ankara International Aerospace Conference. September 10 12, 2007, METU, Ankara-Turkey (One of the member of the 9-person-organizing committee) AIAC 2009, The 5th Ankara International Aerospace Conference. August 17-19, 2009, METU Ankara-Turkey (One of the member of the 7-person-organizing committee) AIAC 2011, The 6th Ankara International Aerospace Conference. September 14-16, 2009, METU, Ankara-Turkey (One of the member of the 7-person-organizing committee) REFEREEING Refereeing for Wiley [John Wiley & Sons, Inc.] Book Company (Book Proposal) Refereeing for Journal of Electroceramics (Journal) Refereeing for IEEE Transactions on Control Systems Technology (Journal) Advances in Structural Engineering (Journal) Ankara International Aerospace Conference - AIAC (Conference) Congress of Defence Technologies (Savunma Teknolojileri Kongresi - SAVTEK) (Conference in Turkish) Ulusal Havacılık Teknolojileri ve Uygulamaları Kongresi - UHAT (Conference in Turkish) 13/13