Arş.Gör. Sinan Melih NİGDELİ ÖZGEÇMİŞ DOSYASI KİŞİSEL BİLGİLER Doğum Yılı : Doğum Yeri : Sabit Telefon : Faks : E-Posta Adresi : Web Adresi : Posta Adresi : 1982 İSTANBUL T: 212473707017949 F: 2128891887 melihnig@istanbul.edu.tr http://aves.istanbul.edu.tr/4148/ İnşaat Mühendisliği Bölümü, İstanbul Üniversitesi, 34320 Avcılar/Istanbul/Turkey EĞİTİM BİLGİLERİ Doktora, İSTANBUL TEKNİK ÜNİVERSİTESİ, Fen Bilimleri Enstitüsü, İnşaat Mühendisliği Anabilim Dalı, 2007-2012 Yüksek Lisans, İSTANBUL TEKNİK ÜNİVERSİTESİ, Fen Bilimleri Enstitüsü, İnşaat Mühendisliği Anabilim Dalı, 2005-2007 Lisans Çift Anadal, İSTANBUL ÜNİVERSİTESİ, Mühendislik Fakültesi, Makina Mühendisliği Bölümü, 2001-2005 Lisans, İSTANBUL ÜNİVERSİTESİ, Mühendislik Fakültesi, İnşaat Mühendisliği Bölümü, 2000-2004 YAPTIĞI TEZLER Doktora, "Yakın fay etkisi altındaki yapılarda aktif tendonlar ile yanal yer değiştirme ve burulma kontrolü", İSTANBUL TEKNİK ÜNİVERSİTESİ Fen Bilimleri Enstitüsü İnşaat Mühendisliği Anabilim Dalı Ağustos, 2012. Yüksek Lisans, "Yapıların Aktif Tendonlar ile Kontrolü", İSTANBUL TEKNİK ÜNİVERSİTESİ Fen Bilimleri Enstitüsü İnşaat Mühendisliği Anabilim Dalı Şubat, 2007. YABANCI DİLLER İngilizce, Çok İyi AKADEMİK UNVANLAR/GÖREVLER Arş.Gör.Dr., İSTANBUL ÜNİVERSİTESİ, Mühendislik Fakültesi, 2012 - Devam Ediyor Arş.Gör., İSTANBUL ÜNİVERSİTESİ, Mühendislik Fakültesi, 2010-2012 ARAŞTIRMA ALANLARI Optimizasyon Deprem Mühendisliği Yapı Mekaniği Sistem Dinamiği ve Kontrolü SCI,SSCI,AHCI INDEXLERİNE GİREN DERGİLERDE YAYIMLANAN MAKALELER Nigdeli S.M., Bekdaş G., Kim S., Geem Z.W., "A novel harmony search based optimization of reinforced concrete biaxially loaded columns", STRUCTURAL ENGINEERING AND MECHANICS, vol.54, pp.1097-1109, 2015 Bekdaş G., Nigdeli S.M., Yang X., "Sizing Optimization of Truss Structures Using Flower Pollination Algorithm",
APPLIED SOFT COMPUTING, vol.37, pp.322-331, 2015 Nigdeli S.M., "Effect of feedback on PID controlled active structures under earthquake excitations", EARTHQUAKES AND STRUCTURES, no.2, pp.217-235, 2014 Nigdeli S.M., Bekdaş G., Alhan C., "Optimization of Seismic Isolation Systems via Harmony Search", ENGINEERING OPTIMIZATION, vol.46, pp.1553-1569, 2014 Nigdeli S.M., Bekdaş G., "Optimum tuned mass damper approaches for adjacent structures", EARTHQUAKES AND STRUCTURES, vol.7, pp.1071-1091, 2014 Nigdeli S.M., Boduroğlu M.H., "Active Tendon Control of Torsionally Irregular Structures under Near-Fault Ground Motion Excitation", COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING, no.9, pp.718-736, 2013 Bekdaş G., Nigdeli S.M., "Mass ratio factor for optimum tuned mass damper strategies", INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, pp.68-84, 2013 Nigdeli S.M., Bekdaş G., "Optimum tuned mass damper design for preventing brittle fracture of RC buildings", Smart Structures and Systems, no.2, pp.137-155, 2013 Bekdaş G., Nigdeli S.M., "Estimating optimum parameters of tuned mass dampers using harmony search", ENGINEERING STRUCTURES, no.33, pp.2716-2723, 2011 DİĞER DERGİLERDE YAYIMLANAN MAKALELER Nigdeli S.M., Bekdaş G., "Robustness of Optimum TMDs According to Change of the Stiffness of the Structure", International Journal of Earthquake Engineering and Hazard Mitigation, vol.2, pp.---, 2014 Nigdeli S.M., Bekdaş G., "Optimization of Tuned Mass Dampers for RC Structures with Projection in Plan", International Journal of Mechanics, pp.101-108, 2013 Bekdaş G., Nigdeli S.M., "Optimization of T-shaped RC Flexural Members for Different Compressive Strengths of Concrete", International Journal of Mechanics, pp.109-119, 2013 KİTAP VEYA KİTAPLARDA BÖLÜMLER Bekdaş G., Nigdeli S.M., Yang X., "Optimum Reinforced Concrete Design by Harmony Search Algorithm", in: Metaheuristics and Optimization in Civil Engineering, Yang X-S., Bekdaş G., Nigdeli S.M., Eds., Springer, -, pp.165-181, 2016 Yang X., Bekdaş G., Nigdeli S.M., Eds., "Metaheuristics and Optimization in Civil Engineering", Springer, -, 2016 Yang X., Bekdaş G., Nigdeli S.M., "Review and Applications of Metaheuristic Algorithms in Civil Engineering", in: Metaheuristics and Optimization in Civil Engineering, Yang X-S., Bekdaş G., Nigdeli S.M., Eds., Springer, -, pp.1-25, 2016 Nigdeli S.M., Bekdaş G., Yang X., "Application of the Flower Pollination Algorithm in Structural Engineering", in: Metaheuristics and Optimization in Civil Engineering, Yang X-S., Bekdaş G., Nigdeli S.M., Eds., Springer, -, pp.25-43, 2016 Nigdeli S.M., Bekdaş G., "Design of Tuned Mass Dampers via Harmony Search for Different Optimization Objectives of Structures", in: Engineering and Applied Sciences Optimization, Lagaros N., Papadrakakis M., Eds., Springer, Berlin, pp.249-266, 2015 Bekdaş G., Nigdeli S.M., "Optimization of Reinforced Concrete Columns Subjected to Uniaxial Loading", in: Engineering and Applied Sciences Optimization, Lagaros N., Papadrakakis M., Eds., Springer, Berlin, pp.339-412, 2015 Bekdaş G., Nigdeli S.M., "Optimization of Tuned Mass Damper with Harmony Search", in: Metaheuristic Applications in Structures and Infrastructures, 1st Edition, Gandomi A. H., Yang X-S., Alavi A. H., Talatahari S., Eds., Elsevier, LONDRA, pp.345-371-, 2013 HAKEMLİ KONGRE/SEMPOZYUM BİLDİRİ KİTAPLARINDA YER ALAN YAYINLAR Bekdaş G., Nigdeli S.M., "Bat algorithm for optimization of reinforced concrete columns", Joint Annual Meeting of GAMM and DMV, Braunschweig, ALMANYA, 7-11 Mart 2016, pp.1-4 Nigdeli S.M., Bekdaş G., Yang X., "Optimum Tuning of Mass Dampers for Seismic Structures Using Flower Pollination Algorithm", 7th European Conference of Civil Engineering (ECCIE '16), Bern, ISVIÇRE, 17-19 Aralık 2016, pp.1-10 Bekdaş G., Nigdeli S.M., Türkakin O.H., "Non-Linear Programing for Sizing Optimization of Truss Structures", 7th European Conference of Civil Engineering (ECCIE '16), Bern, ISVIÇRE, 17-19 Aralık 2016, pp.1-10 Bekdaş G., Nigdeli S.M., "The Effects of Supports on Optimum Design of RC Continuous Beams", 7th European Conference of Civil Engineering (ECCIE '16), Bern, ISVIÇRE, 17-19 Aralık 2016, pp.1-10
Bekdaş G., Nigdeli S.M., Temür R., Kayabekir A.E., "Restricted Optimum Design of Reinforced Concrete Retaining Walls", 7th European Conference of Civil Engineering (ECCIE '16), Bern, ISVIÇRE, 17-19 Aralık 2016, pp.--- Bekdaş G., Nigdeli S.M., Sayin B., "The effect of single and double curvature in optimumdesign of slender reinforced concrete columns", ACSEE 2016: Fourth International Conference on Advances in Civil, Structural and Environmental Engineering, Roma, ITALYA, 15-16 Aralık 2016, pp.61-64 Bekdaş G., Nigdeli S.M., Yang X., "Size Optimization of Truss Structures Employing Flower Pollination Algorithm without Grouping Structural Members", 7th European Conference of Civil Engineering (ECCIE '16), Bern, ISVIÇRE, 17-19 Aralık 2016, pp.1-8 Nigdeli S.M., Bekdaş G., "Teaching Learning Based Optimization for Parameter Estimation of Double Tuned Mass Dampers", 12th International Congress on Advances in Civil Engineering, İSTANBUL, TÜRKIYE, 21-23 Eylül 2016, pp.1-8 Nigdeli S.M., Bekdaş G., Sayin B., "Optimum Tuned Mass Damper Design using Harmony Search with Comparison of Classical Methods", 14th International Conference of Numerical Analysis and Applied Mathematics, Rodos, YUNANISTAN, 19-25 Eylül 2016, pp.1-4 Bekdaş G., Nigdeli S.M., "Optimum Design Of Reinforced Concrete Columns Employing Teaching Learning Based Optimization", 12th International Congress on Advances in Civil Engineering, İSTANBUL, TÜRKIYE, 21-23 Eylül 2016, pp.1-8 Bekdaş G., Nigdeli S.M., Sayin B., "Constraint Factor in Optimization of Truss Structures via Flower Pollination Algorithm", 14th International Conference of Numerical Analysis and Applied Mathematics, Rodos, YUNANISTAN, 19-25 Eylül 2016, pp.1-4 Kayabekir A.E., Bekdaş G., Nigdeli S.M., Temür R., "Optimum design of retaining walls under static and dynamic loads", International Science Symposium (ISS2016), İSTANBUL, TÜRKIYE, 1-4 Eylül 2016, pp.1-10 Nigdeli S.M., Bekdaş G., "Tuning of mass dampers for preventing brittle fracture by employing teaching learning based optimization", Joint Annual Meeting of GAMM and DMV, Braunschweig, ALMANYA, 7-11 Mart 2016, pp.1-4 Nigdeli S.M., Boduroğlu M.H., "YAPILARIN AKTİF TENDONLAR İLE KONTROLÜ VE YAPI ÖZELLİKLERİNİN DEĞİŞİMİNİN KONTROL SİSTEMİNE ETKİSİ", Prof. Dr. Hasan Boduroğlu Sempozyumu, İSTANBUL, TÜRKIYE, 9-10 Mayıs 2016, ss.1-7 Nigdeli S.M., Bekdaş G., "Detailed Optimum Design of Reinforced Concrete Frame Structures", 7th European Conference of Civil Engineering (ECCIE '16), Bern, ISVIÇRE, 17-19 Aralık 2016, pp.1-10 Bekdaş G., Nigdeli S.M., "Kütle Sönümleyicilerinin Ayarlanmasında Metasezgisel Algoritmalar", Prof. Dr. Hasan Boduroğlu Sempozyumu, İSTANBUL, TÜRKIYE, 9-10 Mayıs 2016, ss.1-7 Nigdeli S.M., Bekdaş G., "Teaching-Learning-Based Optimization for Estimating Tuned Mass Damper Parameters", 3rd International Conference on Optimization Techniques in Engineering (OTENG '15), Roma, ITALYA, 7-10 Kasım 2015, pp.1-6 Nigdeli S.M., Boduroğlu M.H., "Effect of Eccentricity on Active Control of Seismic Structures", International Conference on Engineering Vibration, Ljubljana, SLOVENYA, 7-10 Eylül 2015, pp.0-0 Bekdaş G., Nigdeli S.M., "Optimum Design of Reinforced Concrete Beams Using Teaching-Learning-Based Optimization", 3rd International Conference on Optimization Techniques in Engineering (OTENG '15), Roma, ITALYA, 7-10 Kasım 2015, pp.1-6 Nigdeli S.M., Bekdaş G., "A Multi-Objective Optimization of Tuned Mass Dampers for Structures Excited by a wide set of Earthquakes", 23rd International Conference on Multiple Criteria Decision Making (MCDM 2015), Hamburg, ALMANYA, 2-7 Ağustos 2015, pp.--- Bekdaş G., Nigdeli S.M., "Maximum stroke capacity factor for optimum tuned mass dampers on structures", 9th European Solid Mechanics Conference (ESMC 2015), Madrid, ISPANYA, 6-10 Temmuz 2015, pp.--- Nigdeli S.M., Bekdaş G., "Multi Objective Optimization of Double Tuned Mass Dampers Considering Maximum Stroke Capacity", International Conference on Engineering Vibration, Ljubljana, SLOVENYA, 7-10 Eylül 2015, pp.--- Nigdeli S.M., Bekdaş G., Yang X., "Optimum Structural Design of Pin-Jointed Plane Frames Using the Flower Pollination Algorithm", 28th Conference of the European Chapter on Combinatorial Optimization (ECCO XXVIII-2015), Katanya, ITALYA, 28-30 Mayıs 2015, pp.--- Bekdaş G., Nigdeli S.M., "Optimization of TMDs for Seismic Structures Considering Near Field Ground Motion", International Conference on Engineering Vibration, Ljubljana, SLOVENYA, 7-10 Eylül 2015, pp.--- Nigdeli S.M., Bekdaş G., Yang X., "Truss Structure Optimization Using Flower Pollination Algorithm", 9th European Solid Mechanics Conference (ESMC 2015), Madrid, ISPANYA, 6-10 Temmuz 2015, pp.--- Nigdeli S.M., Bekdaş G., "A Robust Optımum Desıgn Approach of TMDs Considering Structural Uncertainty", International Conference on Engineering Vibration, Ljubljana, SLOVENYA, 7-10 Eylül 2015, pp.--- Bekdaş G., Nigdeli S.M., "Multi-objective optimization of reinforced concrete footings using harmony search", 23rd
International Conference on Multiple Criteria Decision Making (MCDM 2015), Hamburg, ALMANYA, 2-7 Ağustos 2015, pp.--- Bekdaş G., Nigdeli S.M., "Optimization of RC frame structures subjected to static loading", 11th World Congress on Computational Mechanics, Barselona, ISPANYA, 20 Temmuz 2014-25 Haziran 2015, pp.3869-3875 Bekdaş G., Nigdeli S.M., "Optimization of Tuned Mass Dampers for Mechanical Systems Subjected to Different Excitations", 28th Conference of the European Chapter on Combinatorial Optimization (ECCO XXVIII-2015), Katanya, ITALYA, 28-30 Mayıs 2015, pp.--- Yılmaz B., Bekdaş G., Nigdeli S.M., "Betonarme İstinat Duvarlarının Çiçeklerin Tozlaşma Algoritması ile Optimizasyonu", XIX. Ulusal Mekanik Kongresi, Karadeniz Teknik Üniversitesi, TRABZON, TÜRKIYE, 24-28 Ağustos 2015, ss.--- Nigdeli S.M., "Maximum Control Force Factor for Actively Controlled Seismic Structures", 11th International Congress on Advances in Civil Engineering, İSTANBUL, TÜRKIYE, 21-25 Ekim 2014, pp..-. Nigdeli S.M., Boduroğlu M.H., "Robustness of Time Delayed Active Structural Control Systems", Second European Conference on Earthquake Engineering, İSTANBUL, TÜRKIYE, 25-29 Ağustos 2014, pp..-. Bekdaş G., Nigdeli S.M., "Optimization of TMDs for Structures Excited by Near-Fault Motions for Different Ground Conditions", 11th International Congress on Advances in Civil Engineering, İSTANBUL, TÜRKIYE, 21-25 Ekim 2014, pp.- -- Nigdeli S.M., Bekdaş G., "Optimization of Reinforced Concrete Shear Walls using Harmony Search", 11th International Congress on Advances in Civil Engineering, İSTANBUL, TÜRKIYE, 21-25 Ekim 2014, pp.--- Bekdaş G., Nigdeli S.M., Yang X., "Metaheuristic Optimization for the Design of Reinforced Concrete Beams under Flexure Moments", 5th European Conference of Civil Engineering (ECCIE '14), Floransa, ITALYA, 22-24 Kasım 2014, pp. --- Bekdaş G., Nigdeli S.M., "Optimization of Tuned Mass Dampers for Minimizing Story Drift of Structures", Second European Conference on Earthquake Engineering, İSTANBUL, TÜRKIYE, 25-29 Ağustos 2014, pp.--- Bekdaş G., Nigdeli S.M., "Optimum Design of Uniaxial RC Columns", An International Conference on Engineering and Applied Sciences Optimization, Kos, YUNANISTAN, 4 Haziran - 6 Mayıs 2014, pp.1-1 Nigdeli S.M., Bekdaş G., "Shape optimization of steel cross-sections for flexural moment", 15th EU/ME Workshop: Metaheuristic and Engineering, İSTANBUL, TÜRKIYE, 24-25 Mart 2014, pp.1-1 Nigdeli S.M., Bekdaş G., "Optimization of TMDs for Different Objectives", An International Conference on Engineering and Applied Sciences Optimization, Kos, YUNANISTAN, 4-6 Haziran 2014, pp.1-1 Nigdeli S.M., Bekdaş G., "Robustness of Optimum TMDs According to Change of the Stiffness of the Structure", 15th EU/ME Workshop: Metaheuristic and Engineering, İSTANBUL, TÜRKIYE, 24-25 Mart 2014, pp.1-1 Bekdaş G., Nigdeli S.M., "The Effect of Eccentricity for Optimum Compressively Loaded Reinforced Concrete Column", 15th EU/ME Workshop: Metaheuristic and Engineering, İSTANBUL, TÜRKIYE, 24-25 Mart 2014, pp.1-1 Bekdaş G., Nigdeli S.M., "Optimization of Slender Reinforced Concrete Columns", 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Erlangen, ALMANYA, 10-14 Mart 2014, pp.1-1 Nigdeli S.M., Bekdaş G., "Optimum Tuned Mass Dampers Design for Structures at Rock and Soil Sites", 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Erlangen, ALMANYA, 10-14 Mart 2014, pp.1-1 Bekdaş G., Nigdeli S.M., "Optimization of Double Tuned Mass Dampers by using Harmony Search", The Twelfth International Conference on Computational Structures Technology, Napoli, ITALYA, 2-5 Eylül 2014, pp.--- Nigdeli S.M., Bekdaş G., "Multiple Response Optimization of Tuned Mass Dampers", 5th European Conference of Civil Engineering (ECCIE '14), Floransa, ITALYA, 22-24 Kasım 2014, pp.--- Nigdeli S.M., Bekdaş G., "Optimum Design of RC Columns According to Effective Length Factor in Buckling", The Twelfth International Conference on Computational Structures Technology, Napoli, ITALYA, 2-5 Eylül 2014, pp.--- Nigdeli S.M., Boduroğlu M.H., "Robustness against Time Delay and Control Force Capacity for Torsionally Irregular Active Controlled Structures", 5th European Conference of Civil Engineering, Floransa, ITALYA, 22-24 Kasım 2014, pp.. -. Nigdeli S.M., "Performance and Robustness of Different Feedback Controls for SDOF Structures", The Twelfth International Conference on Computational Structures Technology, Napoli, ITALYA, 2 Eylül - 5 Ekim 2014, pp..-. Nigdeli S.M., Bekdaş G., "Preventing the displacement of base isolated structures with optimum tuned mass dampers", 11th World Congress on Computational Mechanics, Barselona, ISPANYA, 20-25 Temmuz 2014, pp.3876-3882 Bekdaş G., Nigdeli S.M., "Optimization of Tuned Mass Damper for Adjacent Buildings with Equal Properties", 11th International Conference of Numerical Analysis and Applied Mathematics, YUNANISTAN, 21-27 Eylül 2013, pp.429-
432 Nigdeli S.M., Bekdaş G., "Optimization of RC Beams for Various Cost Ratios of Steel/Concrete", 4rd European Conference of Civil Engineering, TÜRKIYE, 8-10 Ekim 2013 Bekdaş G., Nigdeli S.M., "Optimum Tuned Mass Dampers for Structures with Different Periods and Damping", 4rd European Conference of Civil Engineering, TÜRKIYE, 8-10 Ekim 2013 Nigdeli S.M., Bekdaş G., "The Effect of Impulsive Motions on Optimum Tuned Mass Damper Parameters", 11th Biennial International Conference on Vibration Problems (ICOVP-2013), PORTEKIZ, 9-12 Eylül 2013 Kilinçkale F., Nigdeli S.M., Çiçek A., "Yapı Denetim Kuruluşlarının Çalışmalarının İstatistiksel Değerlendirilmesi", III. Yapı Denetim Sempozyumu, DİYARBAKIR, TÜRKİYE, 5-6 Ekim 2013 Bekdaş G., Nigdeli S.M., "Rassal Arama Tekniği ile Betonarme Kirişlerin Farklı Beton Dayanımları için Optimizasyonu", XVIII. Ulusal Mekanik Kongresi, MANİSA, TÜRKİYE, 26-30 Ağustos 2013 Nigdeli S.M., Boduroğlu M.H., "Active Tendon Control of Reinforced Concrete Frame Structures Subjected to Near- Fault Effects", 11th International Conference of Numerical Analysis and Applied Mathematics, YUNANISTAN, 21-27 Eylül 2013, pp.437-440 Nigdeli S.M., Bekdaş G., "An Optimization Approach for Design of RC Beams Subjected to Flexural and Shear Effects", 11th International Conference of Numerical Analysis and Applied Mathematics, Rodos, YUNANISTAN, 21-27 Eylül 2013, pp.425-428 Nigdeli S.M., Boduroğlu M.H., "The Effect of Time Delay on Active Seismic Control of Structures Using PID Controller", 11th Biennial International Conference on Vibration Problems (ICOVP-2013), PORTEKIZ, 9-12 Eylül 2013 Bekdaş G., Nigdeli S.M., "An Optimization Approach of Tuned Mass Dampers by Considering Uncertain Mass of Structures", 11th Biennial International Conference on Vibration Problems (ICOVP-2013), PORTEKIZ, 21-27 Eylül 2013 Nigdeli S.M., Bekdaş G., "Farklı Periyotlu Bitişik Yapılar için Optimum Kütle Sönümleyicisi Tasarımı", XVIII. Ulusal Mekanik Kongresi, MANİSA, TÜRKİYE, 26-30 Ağustos 2013 Nigdeli S.M., Boduroğlu M.H., "Active Tendon Control of Structures under Near-Fault Ground Motion Excitation", 10th International Congress on Advances in Civil Engineering, TÜRKIYE, 17-19 October 2012 Bekdaş G., Nigdeli S.M., "Cost Optimization of T-shaped Reinforced Concrete Beams under Flexural Effect According to ACI 318", 3rd European Conference of Civil Engineering, FRANSA, 2-4 December 2012 Nigdeli S.M., Bekdaş G., "Pasif Kütle Sönümleyicileri için Optimum Frekans Oranları", İnşaat Mühendisliği nde 100. Yıl Teknik Kongresi, İSTANBUL, TÜRKİYE, 22-24 Kasım 2012 Bekdaş G., Nigdeli S.M., "Metaheuristic Algorithms in Structural Dynamics: An Application of Tuned Mass Damper Optimization", 10th International Conference of Numerical Analysis and Applied Mathematics, YUNANISTAN, 19-25 September 2012, pp.1903-1906 Nigdeli S.M., Bekdaş G., "Improving the Seismic Behavior of Reinforced Concrete Structures with Projection in Plan by using Optimum Tuned Mass Damper", 3rd European Conference of Civil Engineering, FRANSA, 2-4 December 2012 Bekdaş G., Nigdeli S.M., "Eğilme Etkisi Altındaki Betonarme Kirişlerin Maliyet Açısından Optimum Tasarımı", İnşaat Mühendisliği nde 100. Yıl Teknik Kongresi, İSTANBUL, TÜRKİYE,, 22-24 Kasım 2012 Nigdeli S.M., Bekdaş G., "Investigation of Earthquake Factor for Optimum Tuned Mass Dampers", 10th International Conference of Numerical Analysis and Applied Mathematics, YUNANISTAN, 19-25 September 2012, pp.1907-1910 Bekdaş G., Nigdeli S.M., "Performance Of Optimum Tuned Mass Dampers According To Number of Structure Storey", 10th International Congress on Advances in Civil Engineering, TÜRKIYE, 17-19 October 2012 Bekdaş G., Nigdeli S.M., "Preventing the Pounding of Adjacent Buildings with Harmony Search Optimized Tuned Mass Damper", 3rd European Conference of Civil Engineering, FRANSA, 2-4 December 2012 Nigdeli S.M., Bekdaş G., "Optimum Tuned Mass Damper Design For Structures At Near and Far Fault Regions", 10th International Congress on Advances in Civil Engineering, TÜRKIYE, 17-19 October 2012 Bekdaş G., Nigdeli S.M., "Investigation of SDOF idealisation for Structures with Optimum Tuned Mass Dampers", International Congress Natural Cataclysms and Global Problems of the Modern Civilization, TÜRKIYE, 19-21 September 2011 Nigdeli S.M., Bekdaş G., "Optimization of Tunes Mass Damper Parameters for Structures Subjected to Earthquakes with Forward Directivity", International Congress Natural Cataclysms and Global Problems of the Modern Civilization, TÜRKIYE, 19-21 September 2011 Nigdeli S.M., Boduroğlu M.H., "Burulma Düzensizliği Oluşan Yapıların Aktif Tendonlar ile Kontrolü", 7. Ulusal Deprem Mühendisliği Konferansı, İSTANBUL, TÜRKİYE, 30 Mayıs-03 Haziran 2011 Bekdaş G., Nigdeli S.M., "Değişik Periyotlu Yapılar için Optimum Pasif Kütle Sönümleyici Özelliklerinin Belirlenmesi", 1. Türkiye Deprem Mühendisliği ve Sismoloji Konferansı, ANKARA, TÜRKİYE, 11 Ekim-14 Ekim 2011 Nigdeli S.M., Bekdaş G., "Optimum Pasif Kütle Sönümleyicilerinin Belirsiz Özellikli Yapılardaki Etkileri", 1. Türkiye
Deprem Mühendisliği ve Sismoloji Konferansı, ANKARA, TÜRKİYE, 11 Ekim-14 Ekim 2011 Nigdeli S.M., "Active Brace Control of Frame Structures under Earthquake Excitation", Natural Cataclysms and Global Problems of the Modern Civilization, TÜRKIYE, 19-21 September 2011 Nigdeli S.M., Boduroğlu M.H., "Active Tendons for Seismic Control of Buildings", International Conference on Mechanical Science and Engineering, FRANSA, July 2010 DESTEKLENEN PROJELER "Yapı Sistemlerinin Kütle Sönümleyicileri ile Kontrolü", BAP Arastırma Projesi, 18329, Araştırmacı, 2012 "Cost Optimization of T-shaped Reinforced Concrete Beams under Flexural Effect According to ACI 318 (2012), ", BAP Arastırma Projesi, 27606, Araştırmacı, 2013 "Improving the Seismic Behavior of Reinforced Concrete Structures with Projection in Plan by using Optimum Tuned Mass Damper", BAP Arastırma Projesi, 27683, Yönetici, 2013 "Optimum Kütle Sönümleyicileri ile Bitişik Yapıların Çarpışmasının Engellenmesi ", BAP Arastırma Projesi, 31687, Yönetici, 2015 "Betonarme Sürekli Kirişlerin Optimum Tasarımı", BAP Arastırma Projesi, 31688, Araştırmacı, 2015 "Optimization of Double Tuned Mass Dampers by using Harmony Search", BAP Arastırma Projesi, UDP43743, Yönetici, 2014 "Zaman gecikmeli aktif yapısal kontrol sistemlerinin güvenilirliği ", BAP Arastırma Projesi, 44416, Yönetici, Devam Ediyor "Maximum stroke capacity factor for optimum tuned mass dampers on structures ", BAP Diğer, 53885, Yönetici, Devam Ediyor "Yapısal belirsizlikleri dikkate olan dayanıklı optimum kütle sönümleyicisi tasarımı", BAP Diğer, BYP54769, Yönetici, Devam Ediyor "Sismik yapıların aktif kontrolünde dışmerkezliğin etkisi", BAP Diğer, BYP54766, Yönetici, Devam Ediyor "Yapı-zemin etkileşimini dikkate alarak yapılardaki kütle sönümleyicilerinin optimizasyonu", BAP Diğer, FYD-2016-20040, Yönetici, Devam Ediyor "Betonarme Tekil Temellerin Metasezgisel algoritmalar ile optimizasyonu ", BAP Diğer, FYD-2016-20042, Araştırmacı, Devam Ediyor KATILDIĞI BİLİMSEL KONGRE/SEMPOZYUM VE BİLİMSEL TOPLANTILAR 28th Conference of the European Chapter on Combinatorial Optimization (ECCO XXVIII-2015), Katanya, Mayıs 2015 11th International Congress on Advances in Civil Engineering, İstanbul, Ekim 2014 Second European Conference on Earthquake Engineering, İstanbul, Ağustos 2014 The Twelfth International Conference on Computational Structures Technology, Napoli, Eylül 2014 85th Annual Meeting of the International Association of Applied Mathematics and Mechanics, Erlangen, Mart 2014 15th EU/ME Workshop: Metaheuristic and Engineering, İstanbul, Mart 2014 An International Conference on Engineering and Applied Sciences Optimization, Kos, Haziran 2014 11th. World Congress on Computational Mechanics, Barcelona, Temmuz 2014 5th European Conference of Civil Engineering (ECCIE '14), Floransa, Kasım 2014 11th Biennial International Conference on Vibration Problems (ICOVP-2013), Lizbon, Eylül 2013 4rd European Conference of Civil Engineering, Antalya, Ekim 2013 XVIII. Ulusal Mekanik Kongresi, Manisa, Ağustos 2013 11th International Conference of Numerical Analysis and Applied Mathematics, Rodos, Eylül 2013 10th International Conference of Numerical Analysis and Applied Mathematics, Kos, Eylül 2012 3rd European Conference of Civil Engineering, Paris, Aralık 2012 10th International Congress on Advances in Civil Engineering, Ankara, Ekim 2012 İnşaat Mühendisliği nde 100. Yıl Teknik Kongresi, İstanbul, Kasım 2012 Natural Cataclysms and Global Problems of the Modern Civilization, İstanbul, Eylül 2011
1. Türkiye Deprem Mühendisliği ve Sismoloji Konferansı, Ankara, Ekim 2011 7. Ulusal Deprem Mühendisliği Konferansı, İstanbul, Haziran 2011 International Conference on Mechanical Science and Engineering, Paris, Temmuz 2010 ETKİNLİK ORGANİZASYONU Metaheuristic and Numerical Analysis, Düzenleme Kurulu Üyesi,, YUNANISTAN, Eylül 2012 Optimization in Civil Engineering, Düzenleme Kurulu Üyesi,, FRANSA, Aralık 2012 11th Biennial International Conference on Vibration Problems, Düzenleme Kurulu Üyesi,, PORTEKIZ, Eylül 2013 2nd Symposium on Metaheuristic and Numerical Analysis / Engineering Applications, Düzenleme Kurulu Üyesi,, YUNANISTAN, Eylül 2013 15th EU-ME Workshop: Metaheuristic and Engineering, Düzenleme Kurulu Eşbaşkanı, İSTANBUL, TÜRKIYE, Mart 2014 International Conference on Engineering and Applied Sciences Optimization, Düzenleme Kurulu Üyesi,, YUNANISTAN, Haziran 2014 Optimization in Computational Mechanics, Düzenleme Kurulu Üyesi,, ISPANYA, Temmuz 2014 DAVETLİ KONGRE VE SEMPOZYUM GÖREVLERİ 3rd European Conference of Civil Engineering, Oturum Başkanı,, FRANSA, 2012 11th Biennial International Conference on Vibration Problems, Oturum Başkanı,, PORTEKIZ, 2013 11th International Conference of Numerical Analysis and Applied Mathematics, Oturum Başkanı,, YUNANISTAN, 2013 15th EU-ME Workshop: Metaheuristic and Engineering, Oturum Başkanı, İSTANBUL, TÜRKIYE, 2014 International Conference on Engineering and Applied Sciences Optimization, Oturum Başkanı,, YUNANISTAN, 2014 11th. World Congress on Computational Mechanics, Oturum Başkanı,, ISPANYA, 2014 GOOGLE AKADEMİK LINKLERİ VE H INDEXİ 2015, Google Scholar Linkleri: 72, H Index: 3 2014, Google Scholar Linkleri: 46, H Index: 3 2013, Google Scholar Linkleri: 27, H Index: 2 2012, Google Scholar Linkleri: 14, H Index: 1 ATIFLAR 2015, Isı Web Of Science: 21, Uluslararası Diğer: 26, Ulusal Diğer: 0 2014, Isı Web Of Science: 9, Uluslararası Diğer: 20, Ulusal Diğer: 0 2013, Isı Web Of Science: 6, Uluslararası Diğer: 1, Ulusal Diğer: 1 2012, Isı Web Of Science: 0, Uluslararası Diğer: 4, Ulusal Diğer: 0