Method. Doküman TEKSTİL VE DERİ /TEXTİLE AND LEATHER 1 DERİ-01 2 DERİ-02 Deri Leather Deri Leather Deri Çekme Mukavemeti ve uzama yüzdesi tayini/determination of tesile strength and percentage extention Yırtılma yükü tayini-çift kenar yırtığı/determination of tear load- Double edge tear TS 4119 EN ISO 3376 TS 4118-2 EN ISO 3377-2 4.Homogenity and Stability s 475 475 3 DERİ-03 Deri Leather Kalınlık Tayini/Determination of Thickness TS 4117 EN ISO 2589 and the and the Head of and Calibration 415 Sayfa 1/8
Method. Doküman TEKSTİL VE DERİ /TEXTİLE AND LEATHER 4 TEK-01 5 TEK-03 6 TEK-04 Simultaneous- General Simultaneous- General Simultaneous- General Kumaş- Fabric Kumaş- Fabric Kumaş- Fabric En Büyük Kuvvetin Tayini) /Tensile properties of fabrics- Part 1:Determination of maximum force using the strip method Pantolon Biçimindeki Deney Numunelerinin Yırtılma Kuvvetinin Tayini (Tek Yırtılma Metodu)/ Tear properties of fabrics- Part 2: Determination of tear force of trousershaped test specimens (Single tear method) Birim Alan Kütlesi Tayini (Küçük numune kullanılarak birim alan kütlesinin tayini) Woven Fabrics - Determination of Mass Per Unit Area using small sample TS EN ISO 13934-1 EN ISO 13934-1 ISO 13934-1 TS EN ISO 13937-2 EN ISO 13937-2 ISO 13937-2 TS 251 ISO 3801 4.Homogenity and Stability s and the and the Head of and Calibration 590 590 590 Sayfa 2/8
Method. Doküman METALİK MALZEMELER-METALLIC MATERIALS 7 MET-01 Çelik Plaka Steel Plate Metal Optik Emisyon Spektrometrede Kimyasal Analiz i (Düşük Alaşımlı) Chemical Analysis of Metal Optical Emission Spectrometers ( Low Alloyed) ASTM E415-99a 4.Homogenity and Stability s 355 8 MET-02 Donatı Çeliği Reinforcing Steel Ortam Sıcaklığında Çekme Deneyi Tensile testing at room temperature TS EN ISO 6892-1 EN ISO 6892-1 ISO 6892-1 and the and the Head of and Calibration 355 Sayfa 3/8
Method. Doküman KİMYA-CHEMISTRY 9 KİM-13 10 KİM-14 11 KİM-15 Borik Asit/Boric acid Borik Asit/Boric acid Borik Asit/Boric acid Borik asit tayini/determination of boric acid Klor Tayini/Determination of Chloride content-mercurimetric method Sülfat tayini/determination of sulfate content TS 2481-Madde 2.2.2.2 4.Homogenity and Stability s and the and the Head of and Calibration TS 4303 TS ISO 11048/ TS 5095 Sayfa 4/8
Method. Doküman 12 KİM-17 13 KİM-18 14 KİM-19 Bor Oksit/Bor oxide Bor Oksit/Bor oxide Bor Oksit/Bor oxide Bor Oksit tayini/determination of bor oxide Klor Tayini/ Determination of Chloride content Sülfat tayini/determination of sulfate content TS 2481-Madde 2.2.2.2. 4.Homogenity and Stability s and the and the Head of and Calibration TS 4303 TS ISO 11048/ TS 5095 Sayfa 5/8
Method. Doküman 15 KİM-21 16 KİM-22 17 KİM-23 Boraks Dekahidrat Boraks Dekahidrat Boraks Dekahidrat Bor oksit tayini/ Determination of Bor oxide Klor Tayini/ Determination of Chloride content Sülfat tayini/determination of sulfate content TS 1444 4.Homogenity and Stability s and the and the Head of and Calibration TS 4303 TS ISO 11048/ TS 5095 Sayfa 6/8
Method. Doküman 18 KİM-25 19 KİM-26 Boraks Dekahidrat Boraks Pentahidrat Sodyum Tayini/ Determinatin of sodium content Suda Çözünmeyen tayini/ Determination of insoluable in water ASTM C 169-92 TS-1444 Madde 2.3.2 4.Homogenity and Stability s and the and the Head of and Calibration 20 KİM-27 Susuz Boraks Suda Çözünmeyen tayini/ Determination of insoluable in water TS-1444 Madde 2.3.2 Sayfa 7/8
Method. Doküman YAPI MALZEMELERİ- CONSTRUCTION MATERIALS 21 YML-01 Ahşap Esaslı Levhalar/Wood-based panels Eğilme Dayanımı ve Eğilme Elastikiyet Modülünün Tayini / Determination of modulus of elasticity in bending and of bending strength TS EN 310 EN 310 2-Numune Hazırlama2.Item Prepatation 3-Numune Depolama3.Item Storage 4-Homojenlik Ve Kararlılık Deneyleri 4.Homogenity and Stability s NOT :Yukarıda belirtilen aşamalar dönem,dönem taşerona verilebilir.taşeron kullanılması durumunda,yeterliliği uygun bir taşerona görev verilecektir.ve bu işten DKMB sorumlu olacaktır. Various aspects of the proficiency testing scheme can from time to time be subcontracted. When subcontracting occurs, it is placed with a competent subcontractor and the and the Head of and Calibration Centre is responsible for this work. 590 Sayfa 8/8