CIRRUCULUM VITAE Name Surname: SAVAŞ ŞAHİN Education: Doctor of Philosophy Tel: +90.232.3293535 / 3713 E-mail: phd.savas.sahin@gmail.com savas.sahin@ikc.edu.tr Education: Degree Field Universtiy Year B.Sc. Electronics & Communications Engineering Kocaeli University 1996 M.Sc. Electrical-Electronics Engineering Ege University 2003 Ph.D. Electrical-Electronics Engineering Dokuz Eylül University 2010 M.Sc. Thesis: Neural Network Based Model Predictive Control Ph.D. Thesis: Nonlinear Dynamical State Feedback Design for Tracking and Chaotification Experiences: Title Work Place Year Asst. Prof. (Visiting Researher) Asst. Prof. Instructor (Ph.D.) Instructor TU Delft University, Delft Center for System and Control (DCSC), Holland İzmir Katip Çelebi University, Faculty of Engineering and Architecture, Department of Electrical-Electronics Engineering Ege University, Ege Vocational School, Department of Control and Automation Technology, İzmir Ege University, Ege Vocational School, Department of Control and Automation Technology, İzmir 06.2013-09.2013 2012-2010-2012 2000-2010 Engineer Telekom A.Ş., Department of Hardware, İzmir 1999-2000 Engineer 3rd Air Supply and Maintenance Centre, Electronic Labs, 1997-1998 Ankara Engineer AS Data A.Ş., Department of Hardware, İstanbul 1996-1997 PUBLICATIONS A. Journal Papers (SCI/Peer Reviewed Journals): A1. S. Şahin, M. Ölmez, Y. İşler, Microcontroller-Based Experimental Setup and Experiments on SCADA Education, IEEE Transactions on Education, 53(3), 437 444, 2010. A2. O. Ekren, S. Şahin, Y. İşler, Comparison of Different Controllers for Variable Speed Compressor and Electronic Expansion Valve, International Journal of Refrigeration, 33(6), 1161 1168, 2010. 1
A3. S. Şahin, C. Güzeliş, Chaotification of Real Systems by Dynamic State Feedback, IEEE Antennas and Propagation Magazine, 52(6), 222-233, 2010. A4. O. Ekren, S. Şahin, Y. İşler, Experimental Development of Transfer Functions for Variable Speed Chiller System, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 226(3), 216-228, 2012. A5. S. Şahin, Y. İşler, Microcontroller-Based Robotics and SCADA Experiments, IEEE Transactions on Education, 56(4), 424-429, 2013. A6. S. Şahin, C. Güzeliş, A Dynamical State Feedback Chaotification Method with Application on Liquid Mixing, Journal of Circuits, Systems, and Computers, 22(7), 1350059-1, -17, 2013. A7. S. Şahin, Modbus-Based SCADA/HMI Applications, Journal of Information Technology and Application in Education, 2(2), 61-66, 2013. B. Conference Papers (International): B1. S. Şahin, A. Savran, A Neural Network Approach to Model Predictive Control, The 14th Turkish Symposium on Artificial Intelligence and Neural Networks: TAINN'2005, 386-392, İzmir/Turkey, 16-17 June 2005. B2. S. Şahin, Y. İşler, C. Güzeliş, A Microcontroller Based Test Platform for Controller Design, IEEE International Symposium on Industrial Electronics 2010: ISIE'2010, Bari/Italy, vol., no., 36-41, 4-7 July 2010. B3. S. Şahin, Y. İşler, M.B. Selek, Sicaklik Görüntülenmesi İçin Deneysel Bir SCADA Uygulaması (An Experimental SCADA Study in Temperature Monitoring), 2nd International and 6th National Vocational Schools Symposium UMYOS 2011, Aydın/Türkiye, 25-27 Mayıs 2011. B4. M.B. Selek, S. Şahin, Meslek Yüksekokullarinda Mesleki Eğitim İçin Yeni Bir Eğitim Modelinin Oluşturulması (A New Education Model for Vocational Training in the Vocational High Schools), 2nd International and 6th National Vocational Schools Symposium UMYOS 2011, Aydın/Türkiye, 25-27 Mayıs 2011. B5. S. Şahin, C. Güzeliş, Engineering applications of a dynamical state feedback chaotification method, Numerical Analysis and Applied Mathematics ICNAAM 2012 Kos/Greece, AIP Conf. Proc., 1479, 686-690, 2012. doi: 10.1063/1.47562272011. C. Book / Book Chapters: C1. S. Şahin, Y. İşler, C. Güzeliş, A Real Time Simulation Platform for Controller Design, Test and Redesign, 19 th chapter in Real-time Simulation Technologies: Principles, Methodologies, and Applications, ISBN-13:978-1-4398-4723-7, edited by Popovici, K. and Mosterman, P.J., CRC Press, 2012. C2. O. Ekren, S. Şahin, Y. İşler, Operation of Compressor and Electronic Expansion Valve via Different Controllers, book chapter in Fuzzy Logic / Book 2, ISBN: 979-9533078723, InTech OpenAccess Publisher, 2012. 2
D. Journal Papers (National): D1. S. Şahin, Y. İşler, M.B. Selek, Sanal Aygıtlarla Sıvı Seviyesi ve Sıcaklık Kontrolü Deneyine Örnek Bir Uygulama (An Example Experiment In Control Of Liquid Level and Temperature Using Virtual Instruments), Celal Bayar Üniversitesi Soma Meslek Yüksekokulu Teknik Bilimler Dergisi (Celal Bayar University, Journal of Technical Sciences), 8(1), 1-10, 2007. D2. M. Ölmez, C. Güzeliş, S. Şahin, A. Kocaoğlu, Temiz Enerji Dönüşüm Cihazları Olarak Gelecek Vaat Eden Yakıt Hücreleri (Promising Fuel Cells as Clean Energy Conversion Devices), 3e Electrotech, 184(10), 192-194, 2009. D3. Y. İşler, S. Şahin, Lookout Yazılımı ile Araç Yıkama Sistemi Tasarımı Car-Washing Machine Design using Lookout Software), Pamukkale Üniversitesi Akademik Dizayn Dergisi (Pamukkale University, Journal of Academic Design), 3(2), 43-47, 2009. D4. S. Şahin, M. Ölmez, Elektrik Enerjisi Üretimi ve Yenilenebilir Enerji Kaynaklarinin Önemi (Importance of Producing Electrical Energy and Renewable Energy Resources), 3e Electrotech, 189(1), 110-114, 2010. D5. S. Şahin, O. Ekren, Y. İşler, C. Güzeliş, Değişken Hızlı Soğutma Sistemleri İçin Gerçek- Zaman Benzetimcisi Kullanarak Yapay Sinir Ağları Temelli Denetleyici Tasarımı ve Gerçeklenmesi (Design and Implementation of Artificial Neural Networks Controller via a Real-Time Simulator for Variable Speed Refrigeration Systems), Mühendis ve Makina Dergisi (Engineer and Machinery Journal)), 51(603), 8-15, 2010. D6. M. B. Selek, S. Şahin, Y. İşler, Soğutma Kompresörlerinin Güneş Enerjisiyle Çalıştırılması İçin Şebeke Bağlantılı İnvertör Tasarımı (Grid Connected Inverter Design for the PV Powered Refrigeration Compressors), Sogutma Dunyasi Dergisi, 14(54), Sayfa 52-56, 2011. D7. M. B. Selek, S. Şahin, Y. İşler, Eğitim-Üretim Modeli Yaklaşımıyla Meslek Yüksekokullarının Sorunlarına Olası Çözümlerin Araştırılması (Investigating Possible Solutions based on the Education-Production Model for Problems in the Vocational High Schools), Pamukkale Üniversitesi Akademik Dizayn Dergisi (Pamukkale University, Journal of Academic Design), Accepted, 2011. D8. S. Şahin, Endüstriyel Otomasyon Eğitimi için Lookout Yazılım Tabanlı Sıvı Karışım Süreci Tasarımı (Lookout Software Based Liquid Mixing Process Design for Industrial Automation Education), Süleyman Demirel Üniversitesi (Süleyman Demirel University), Teknik Bilimler Dergisi (Journal of Technical Sciences), 2(1), 42-45, 2012. E. Conference Papers (National): E1. S. Şahin, C. Harmanşah, Endüstriyel Otomasyon Teknolojisi Eğitiminde Çoklu Ortam Kullanımı (Use of Multimedia in Industrial Automation Technology Training), II. Ulusal Meslek Yüksekokulları Sempozyumu (2 nd National Vocational Schools Symposium), 210-213, İzmir/Turkey, 15-17 Ekim 2003. E2. S. Şahin, C. Güzeliş, Y. İşler, "Değişken Hızlı Soğutma Sistemleri için Gerçek-Zaman Benzetimci Uygulamaları (Applications of Real-Time Simulator for Variable Speed Refrigeration 3
Systems)", 7th National Conference on Electrical, Electronics and Computer Engineering (ELECO2012), Bursa / Turkey, 29 November-1 December 2012. F. Other Publications (Patent/Utility Model): F1. O. Ekren, Y. İşler, S. Şahin, Soğutma Sistemlerinin Değişik Kontrol Algoritmaları ile Değişken Hızlı Çalıştırılması için Mikrodenetleyici Kart (Microcontroller Board for Variable-Speed Running of Chiller Systems using Different Control Algorithms), Türk Patent Enstitüsü (Turkish Patent Office), Faydalı model, (Utility Model), 2009-6225, 2009. F2. S. Şahin, Y. İşler, C. Güzeliş, Denetleyici Tasarımı için Mikrodenetleyici Tabanlı Gerçek- Zaman Benzetimci Laboratuar Düzeneği Kartı (A Microcontroller Based Real-Time Simulation Laboratory Card for Designing Controller), Türk Patent Enstitüsü (Turkish Patent Office), Faydalı model, (Utility Model), 2009-9805, 2009. F3. S. Şahin, C. Güzeliş, Mikrodenetleyici Tabanlı Kaotik Sıvı Karıştırıcı Kartı (A Microcontroller Based Chaotic Liquid Mixing Card), Türk Patent Enstitüsü (Turkish Patent Office), Faydalı model, (Utility Model), 2011-00615, 2011. G. Projects : G1. Yakıt Hücresine Dayalı Temel Bilim - Temel Mühendislik Tümleşik Aktif Eğitim Laboratuar Düzeneği Tasarımı (Design of Fuel Cell Based Basic Science Basic Engineering Integration Active Education Laboratory Setup), Supported by Scientific Projects Council of Dokuz Eylül University, 2005.KB.FEN.061, Researcher, 55000TL, 2005-2008. G2. Yenilenebilir Enerji Sistemleri İçin Çok Seviyeli DC-AC İnvertör Tasarımı ve Gerçeklenmesi (Designing and Implementing Multi-Level DC-AC Invertor for Renewable Energy Systems), Supported by Scientific Projects Council of Ege University, 2007.EMYO.001, Researcher, 2450TL, 2007-2010. G3. SCADA uyumlu PLC ve ultrasonik transmiter kullanarak seviye kontrolü uygulaması (Application of liquid level control by using SCADA based PLC and ultrasonic transmitter), Supported by Scientific Projects Council of Ege University, 2009.EMYO.001, Researcher, 3000TL, 2009-2012. G4. Enerji Verimi Sağlayan Gürbüz Kaotik Karıştırıcı ve Manipülatörü Tasarımı ve Gerçeklemesi (Design and Implementation Robust Chaotic Mixer and Manipulator Provided Energy Efficient), Supported by Scientific Projects Council of Izmir Katip Celebi University, 2013-1-FMBP-09, Project Supervisor, 79200TL, 2013-2015. G5. Çok Fonksiyonlu Protez El için EMG Sinyallerini Kullanarak Uzman Sistem Tasarımı (Design of Expert System Using Surface EMG Signal for Movements of Multi-Function Prosthetic Hand), Supported by Scientific Projects Council of Izmir Katip Celebi University, 2013-2-FMBP-49, Researcher, 89999TL, 2013-2015. G6. Endüstriyel Otomasyona Yönelik Tasarımlar: Seri, Paralel ve Hibrit Robot Sistemlerinin Geliştirilmesi (Design for Industrial Automation: Development of Serial, Parallel, and Hybrid Robotics Systems), Supported by Scientific Projects Council of Izmir Katip Celebi University, 2013-2-FMBP-XX, Researcher, 64595TL, 2013-2015. 4
G7. Tıbbi Uygulamalar için 6 Serbestlik Dereceli Haptik Manipülatör Tasarımı (6 Degree of Freedom Haptic Manipulator Design for Medical Applications), Supported by Scientific Projects Council of Izmir Katip Celebi University, 2013-2-FMBP-XX, Researcher, 78491TL, 2013-2015. G8. Değişken Devirli Kompresörlü Soğutma Sistemlerinde Kompresör ve Fan Hizlarinin Veriye Dayali Esnek Kontrol Yöntemleri Uygulanarak Verimin Arttirilmasi (Improving the efficiency of the fan speeds based on the data Variable Speed Compressor Compressor Refrigeration Systems by Applying Flexible Control Procedures), TÜBİTAK TEYDEB University-Industry Collaboration Project, 5130027, Researcher, 58388TL, 01.11.2013-30.04.2015. G9. Transvaginal Uterine Amputation Device, TÜBİTAK ARDEB, 113M523, Researcher, 209265TL, 2013-2015. G10. İzmir Katip Celebi Üniversitesi Merkezi Araştırma Laboratuarının Kurulması (Establishment of Central Research Laboratory at Izmir Katip Celebi University), Ministry of Development of the Republic of Turkey,, Researcher, 12000000TL, 2014-2017. G11. Akıllı Okul Akıllı Kart (MIRAFE) Teknolojisi ile Okul Otomasyonu (Smart School - School Automation System with Smart Kart (MIRAFE)), KOSGEB R&D and Innovation Program, Advisor, 397610TL, 10.09.2013-10.09.2014. Administrative Position: Coordinator of the Department of Control and Automation Technology, Ege Universty Ege Vocational School, (2007 2012) Head Deputy of Department of Electrical-Electronics Engineering, İzmir Katip Çelebi University, (2012- ) Refereeing in Journals: Dokuz Eylül University Journal of Engineering Sciences Fırat Üniversitesi Mühendislik Bilimleri Dergisi IEEE Transactions on Education IEEE Transactions on Fuzzy Systems IEEE Transactions on Industrial Electronics IEEE Transactions on Neural Networks ISA Transaction Journal of Circuit, System and Computers Transactions of the Institute of Measurement and Control Turkish Journal of Electrical Engineering & Computer Sciences Research Interests: Control Systems Nonlinear Control Chaos Control and Chaotification Real-Time Simulation Modeling and Identification 5