ENDÜSTRİ MÜHENDİSLİĞİ BÖLÜMÜ 2012 EYLÜL-2013 EYLÜL TARİHLERİ ARASINDAKİ BİLİMSEL FAALİYETLERİ a) Uluslararası hakemli dergilerde yayınlanan makaleler (SCI-Expanded, SSCI ve AHCI kapsamındaki dergilerde yayınlanan makalelerin belirtilmesi), AYAG, Z., ÖZDEMİR, R.G., (2012) Evaluating Machine Tool Alternatives Through Modified TOPSIS and Alpha-Cut Based Fuzzy ANP Int. J. Production Economics, Vol. 140, 630 636 pp., DOI:10.1016/j.ijpe. POLAT, Ö., CHRISTEN, D.K., AYTUĞ, T., ERTUĞRUL, M., PARANTHAMAN, WEE, M., S. H., LEONARD, K. J., THOMPSON, J.R., (2012) The Superconducting Properties of YBCO Films on Surface Decorated LaMnO3 Substrates via Ta and Pd Nanoislands Supercond. Science & Techn. 25, 025018. POLAT, Ö., AYTUĞ, T., ERTUĞRUL, M., PARANTHAMAN, M., MEYER, H. M., BOGORIN, D., LUPINI, A. R., WU, W., CHRISTEN, D.K., (2013) Nanostructured Columnar Heterostructures of TiO2 and Cu2O Enabled by a Thin-Film Self-Assembly Approach: Potential for Photovoltaics, Materials Research Bulletin 48, 352-356. TARHAN, E., (2012) Importance of the Course of Economics in Engineering and Architecture Faculty, e- Journal of New World Sciences Academy, Accepted January 2012, ISSN: 1306-3111 pp. 36-44 (9 pages) TARHAN, E., (2012) Case Studies with Treatment Interventions among Ten Family Businesses in Istanbul Scientific & Academic Management Journal, Accepted, Vol 2, No 5. ÜNEY-YÜKSEKTEPE, F., A novel approach to cutting decision trees, Central European Journal of Operational Research accepted for publication, DOI: 10.1007/s10100-013-0312-9.
b) Uluslararası bilimsel toplantılarda sunulan ve bildiriler kitabında (Proceedings) basılan bildiriler, ERSOY, H., BULUT, E., AKTİN, T., GERGİN, Z., (2012) A Mathematical Model For Sustainable Supplier Selection In The Apparel Industry, 3. International Conference on Industrial Engineering and Operations Management (IEOM 2012), İstanbul, Türkiye. GERGİN, Z., AKTİN, T., SARIGÖLLÜ, A.N., ALTUNCU, S., (2012) Value Stream Mapping of an Innovative Design The Analysis of Transforming Regular Supermarket Carts to Smart Carts, International Conference on Value Chain Sustainability, İzmir, Türkiye. ÖZDEMİR, R. G., SEZEN, T., (2013), Component Inventory Allocation in Assembly Line Balancing With Fuzzy Performance Ratings, 3rd International Fuzzy Systems Symposium, October 24-25, İstanbul, Türkiye. ÖZDEMİR, R. G., ÇINAR, U., KALEM, E., ÖZÇELİK, O., (2013), Sub-Assembly Detection and Line Balancing Using Fuzzy Goal Programming Approach, 3rd International Fuzzy Systems Symposium, İstanbul, Türkiye. ÖZDEMİR, R. G., YUKSEKTEPE, F. U., KARACA, N., (2012), Multi Objective Mixed Model Assembly Line Balancing, 3rd International Conference on Industrial Engineering and Operations Management (IEOM 2012), İstanbul, Türkiye. ÖZDEMİR, R. G., ACAR, Y. E., YAZICI H. M., (2012), Mixed Model Assembly Line Balancing with Component Inventory Levels and Model Sequences, The 8th International Symposium On Intelligent & Manufacturing Systems, Antalya, Türkiye. ÖZDEMİR, R. G., KULA, U., (2012), Mixed Model Assembly Line Balancing with Sub-Assembly Selection in Automotive Industry, The 10th International FLINS Conference on Uncertainty Modeling in Knowledge Engineering and Decision Making (FLINS 2012), Istanbul, Türkiye. ÖZDEMİR, R.G., DEMİRER, R.M., AYAĞ, Z., TARHAN, İ.E., AVCI FAKI, F., DURAK, M.Y, (2013) A Hybrid Approach for Fuzzy Clustering and Assembly Line Balancing Problems, The 3rd International Fuzzy Systems Symposium (FUZZYSS'13)
ÖZDEMİR, R.G., AYAĞ, Z., DEMİRER, R.M., AVCI FAKI, F., DURAK, M.Y., (2013) Selection of Sub-Contractor for Cutting Operation in Textile Industry Using Fuzzy TOPSIS, The 3rd International Fuzzy Systems Symposium (FUZZYSS'13) c) Uluslararası bilimsel toplantılarda sunulan ve bildiri özetleri kitabında basılan bildiriler, BAYTÜRK, E., DURAK, M. Y., ÜNEY-YÜKSEKTEPE, F., (2013) Aircraft Maintenance Scheduling Via Optimization, in 26th European Conference on Operational Research, Roma, İtalya. BÜLBÜL, P., KARAHAN, E., GERGİN, Z., (2012) Analyzing The Impact of Lean Practices on Procrss Performance in Aerospace Industry, 3. European Decision Sciences Institute Congress (EDSI 2012), İstanbul, Türkiye. COŞKUN, N., ÇAM, Y., GERGİN, Z., AKTİN, T., (2012) A Mathematical Modelling Approach for Integrating Sustainability Strategy into Procurement Decisions, 3. European Decision Sciences Institute Congress (EDSI 2012), İstanbul, Türkiye. FEYZİOĞLU, O., ÜLKÜ, İ., (2013) Considering Travel Time and Demand Uncertainties while Setting Optimum Transit Line Frequencies, in 26th EURO- INFORMS Joint International Meeting, Roma, İtalya. HALULU, S., HÖRMANN, W.,(2013) Quantifying the Risk of Portfolios Containing Stocks and Commodities (26th European Conference on Operational Research, Roma, İtalya) HATMAN, Z.S., BÜYÜKBAYRAK, S., TAŞKIN, G., AKTİN, T., (2013) Analyzing the Effect of Different Marketing Strategies on the Production Planning System of EVYAP, International IIE Conference & Yöneylem Araştırması ve Endüstri Mühendisliği 33. Ulusal Kongresi, İstanbul, Türkiye. MUTLU, M., GÖKER, N., GERGİN Z., AKTİN, T., (2013) Value Stream Mapping in an Apparel Supplier for Waste Reduction, International IIE Conference & Yöneylem Araştırması ve Endüstri Mühendisliği 33. Ulusal Kongresi, İstanbul, Türkiye.
ÖZÇELİK, O., ÖZDEMİR, R. G., ÇINAR, U., KALEM, E., (2013), Mathematical Modeling Approach to Sub-Assembly Detection and Assembly Line Balancing Problems, The 26th European Conference on Operations Research, Roma, İtalya. ÖZDEMİR, R. G., ADALI, Y. C., KARAMAN, K., (2012), Category Layout Planning and Shelf Space Allocation in Retail Stores, The 25th European Conference on Operations Research, Vilnius, Litvanya. ÖZDEMİR, R. G., HANCI, T., KAPÇAK, S., (2012), Mathematical and Heuristic Approaches for Simultaneous Balancing and Sequencing Problem, Institute for Operations Research and the Management Sciences (INFORMS) Annual Meeting 2012, Phoenix, AZ, USA. ÖZDEMİR, R. G., UZUN, E. N., TOPUK, N., (2013), A Multi Period Order Picking Approach to a Multi Stage Logistic System, The 26th European Conference on Operations Research, Roma, İtalya. SEZEN, T., BAYDUR, H. Ş., ÖZDEMİR, R. G., (2013), Component Inventory Space Allocation and Balancing in Assembly Lines, The 26th European Conference on Operations Research, Roma, İtalya. ŞENÇİMEN, B., ERDİNÇ, M., TORBALI, B., AKTİN, T., (2013) Minimization of Order Lead Time for a Key Strategic Customer of an Apparel Manufacturer, International IIE Conference & Yöneylem Araştırması ve Endüstri Mühendisliği 33. Ulusal Kongresi, İstanbul,Türkiye. TARHAN, E., (2013) Creating a New Change Model, International IIE Conference & YAEM. ÜNEY-YÜKSEKTEPE, F., AKTİN, T., (2013) Analyzing the Kidney Allocation Process through Alternative Scenarios, (davetli bildiri), International IIE Conference & Yöneylem Araştırması ve Endüstri Mühendisliği 33. Ulusal Kongresi, İstanbul,Türkiye. ÜNEY-YÜKSEKTEPE, F., (2013) A Novel Approach to Cutting Decision Trees, in 26 th European Conference on Operational Research, Roma, İtalya.
d) Ulusal hakemli dergilerde yayınlanan makaleler, e) Diğer ulusal dergilerde yayınlanan makaleler, TARHAN, E., İnşaat Sektörünün Türkiye Ekonomisindeki Payı ve Önemi Cumhuriyet Bilim Teknoloji Dergisi, 29 Kasım 2013 yayını. f) Ulusal bilimsel toplantılarda sunulan ve bildiri özetleri kitabında basılan bildiriler, AKAR, A., DEĞİRMENCİ, A. Ç., BİRİNCİ, S., ve ÜNEY-YÜKSEKTEPE, F., (2013) A Mathematical Programming Approach to Mixed Model Assembly Line Balancing & Sequencing, in YA/EM 2013 XXXIII. National Congress, İstanbul, Türkiye. AKIŞ, A., SIRMA, Z., YALÇIN, Z., ve ÜNEY-YÜKSEKTEPE, F., (2013) Route Design in a Pharmaceutical Warehouse Via Mathematical Programming, in YA/EM 2013 XXXIII. National Congress, İstanbul, Türkiye. ATEŞOĞLU, A., GÜROĞLU, T., YAZGAN, B., (2013) ÜNEY-YÜKSEKTEPE, F., Optimization Based Distribution Planning in Turkuvaz Dağıtım & Pazarlama, in YA/EM 2013 XXXIII. National Congress, İstanbul, Türkiye. BALOTA, E., BİLİR, N., GERGİN, Z., (2012) Sipariş Tipi Bir Üretim Sisteminde Uygun Siparişlerin Seçimi ve Çizelgelenmesi Probleminin Kaynak Kısıtlı Proje Çizelgeleme Yaklaşımı ile Modellenmesi, Yöneylem Araştırması ve Endüstri Mühendisliği 32. Ulusal Kongresi (YAEM 2012), İstanbul, Türkiye. FEYZİOĞLU, O., ÜLKÜ, İ., (2013) Eniyi Toplu Taşıma Sefer Sıklıklarını Belirlemede Yolculuk Süresi ve Talebindeki Belirsizliğin Gözetilmesi,Yöneylem Araştırması ve Endüstri Mühendisliği 33. Ulusal Kongresi (YAEM 2013) Uluslararası IIE Konferansı, İstanbul, Türkiye.
GERGİN, Z., KARABAĞ, B., KARALI, A., (2013) Kalite İyileştirmesine Yönelik Bütünleşik Kalite Fonksiyon Yayılımı ve Modelleme Uygulaması 13. Üretim Araştırmaları Sempozyumu (ÜAS 2013), Sakarya, Türkiye. ÖZDEMİR, R. G., TOPUK, N., UZUN, E. N., (2013), Çok Aşamalı Bir Lojistik Sistemi için Çok Periyotlu Sipariş Toplama Yaklaşımı, 33. Ulusal Yöneylem Araştırması ve Endüstri Mühendisliği Kongresi (YAEM 13), Bildiri Özetleri Kitabı, Bilkent Üniversitesi, İstanbul. ÖZDEMİR, R. G., KALEM, E., ÖZÇELİK, O., ÇINAR, U., (2013), Karma Modelli Hatlar için Ara-Montaj Oluşturma ve Dengeleme Yaklaşımı, 33. Ulusal Yöneylem Araştırması ve Endüstri Mühendisliği Kongresi (YAEM 13), Bildiri Özetleri Kitabı, Bilkent Üniversitesi, İstanbul. ÖZDEMİR, R. G., AKMANDOR, B., DURAK M. Y., (2012), Otomotiv Endüstrisinde Karma Modelli Montaj Hattı Dengeleme ve Ara-Montaj Seçimi Problemlerine Eşzamanlı Matematiksel Modelleme Yaklaşımı, 32. Ulusal Yoneylem Arastırması ve Endustri Muhendisliği (YA/EM 12) Kongresi, Bildiri Özetleri Kitabı, Doğuş Üniversitesi, İstanbul. ÖZDEMİR, R. G., KAPÇAK, S., HANCI, T., (2012), Otomotiv Endüstrisinde Karma Modelli Montaj Hattı Dengeleme ve Sıralama Problemlerine Eşzamanlı Çözüm Yaklaşımı, 32. Ulusal Yoneylem Arastırması ve Endustri Muhendisliği (YA/EM 12) Kongresi, Bildiri Özetleri Kitabı, Doğuş Üniversitesi, İstanbul. ÖZDEMİR, R. G., MARAL, S., OKTAY C., (2012), Otomotiv Endüstrisinde Ara- Montaj Oluşturma ve Montaj Sırası Planlama Yaklaşımı, 32. Ulusal Yoneylem Arastırması ve Endustri Muhendisliği (YA/EM 12) Kongresi, Bildiri Özetleri Kitabı, Doğuş Üniversitesi, İstanbul, Türkiye. TARHAN, E., (2013) Dönüşümsel Liderlilk İçerik Araştırması, 13. Üretim Araştırmaları Sempozyumu, 25-27 Eylül 2013 Sakarya Üniversitesi, Sakarya, Türkiye. ÜNEY-YÜKSEKTEPE, F., AKTİN, T., (2013) Analyzing The Kidney Allocation Process Through Alternative Scnearios, in YA/EM 2013 XXXIII. National Congress, İstanbul, Türkiye.
g) Kitaplar, h) Teknik Raporlar, i) Tertiplenen bilimsel toplantılar, ÖZDEMİR,R.G., HALULU, S., TOPUK, N., MUTLU, M., DURAK, M.Y., BAYTÜRK, E., (2013) 3rd International Fuzzy Systems Symposium, Department of Industrial Engineering, İstanbul, Türkiye. j) Patentler, POLAT, Ö., (2012) Phase-Separated, Epitaxial Composite Cap Layers for Electronic Device Applications, U.S. Patent No. 8,221,909. POLAT,Ö., (2013) Method for Producing Microstructured Templates and Their Use in Providing Pinning Enhancements in Superconducting Films Deposited Thereon, U.S. Patent No. 8,486, 864. POLAT,Ö., (2014) Hetero-Junction Photovoltaic Device and Method of Fabricating the Device, U.S. Patent No. 8,647,915.