FİBER OPTİK KABLOLAR Fokabeks Kablo ve Sistemleri Limited Şirketi Ataşehir Bulvarı 38. Ada Ata 3/3 Plaza Kat:6 No:60 Ataşehir 34758 İstanbul Tel: +90 216 456 91 38 39 Faks: +90 216 456 91 41 www.focabex.com
TF10011 FTL1 KEF5E Boru ve direk toprağa döşeme şartlarına uygun fiber optik Kablo Kablo Tasarımı IEC/EN 60794-3-10 Merkez tüp : Tek kat PBTP, tüplerin içersi uygun bir dolgu malzemesi ile doldurulacaktır Güçlendirme elemanları: Aramid iplikler İç kılıf : Siyah LDPE veya siyah LLDPE (Min kalınlık : 1.1 mm) Zırh: Her iki tarafı kopolimer kaplı korige çelik bant (Min binme 3 mm). Zırh altına iki adet karşılıklı yırtma ipi, firma tanımlama şeridi ve boylamasına suda şişen bant verilecektir Dış kılıf : Portakal renkli orta yoğunluklu polietilen (MDPE) 4 FO-Y TÜRKSAT Yer altı fiber optik kablo boruda veya direk toprak altına döşemeye uygun Teknik Özellikler No. of Fibres 4 Tasarım 1 x 4E Tüp - Ø mm 3.0 Çelik bant kalınlık mm 0.15 Kılıf kalınlık mm 1,8 mm Kablo çapı - ø mm 12.0 Kablo ağırlık kg / km 130 Çekme yükü N 1200 Minimum Bükme Yarıçapları mm Dinamik 15 x Kablo-Ø Statik 20 x Kablo-Ø Sıcaklık aralığı C Döşeme: -10 -> +50 Mekaniksel ve Çevresel Özellikler Taşıma & Depolama: -40 -> +80 Çalışma: -40 -> +70 Test Standard Value Sanction* Maks. montaj gerilimi IEC 60794-1-2-E1 1200 N çevrilebilir, fiber uzaması 0.33% Maks. işletme gerilimi IEC 60794-1-2-E1 700 fiber uzaması 0.05%, 0.05 db Ezme IEC 60794-1-2-E3 1500 N / 100 mm, (maks.15 dk) 0.05 db, hasar olmayacak Darbe IEC 60794-1-2-E4 30 Nm, 3 darbe, R= 300 mm ya 0.05 db (Test sonrası) da 5 Nm, 3 darbe, R= 12.5 mm Burulma IEC 60794-1-2-E7 100N, +/- 180, 10 tur 0.05 db, hasar olmayacak Tekrar Bükme IEC 60794-1-2-E6 R=15x D, 50 N, 10 tur hasar olmayacak Kablo bükme IEC 60794-1-2-E11 R=20x D, 4 dönüs, 3 tur 0.05 db, hasar olmayacak Kink IEC 60794 1 2 E10 R=20x D Kink olmayacak Su sızdırmazlık IEC 60794-1-2-F5B numune=1m, su sütünu=1m 24 saat sonra su sızdırmazlığı Polietilen Soyulması IEC 60708 veya benzer >8 N/mm Sağlanacaktır Klima IEC 60794-1-2-F1-40 C ile +70 C 0.05 db /km * Testler sırasında tüm optik ölçümler 1550 nm de yapılacak, : Kablo zayıfla değişimi, R : Yarı çap, D : Kablo çapı Optik Özellikler Optik özellikler için lütfen fiber veri sayfasını dikkate alınız Merkez tüplü TF10011-FTL1 KEF5E-014 www.prysmiangroup.com Issued 2015-10-01 BS / Page 1 of 2
TF10011 FTL1 KEF5E Renklendirme ve Tanımlamalar Fibre Renklendirme No. 1 2 3 4 Renk kırmızı sarı yeşil naturel Merkez tüp Merkez tüp rengi kırmızı olacaktır Kılıf renkleri: İç rengi siyah, dış kılıf rengi portakal olacaktır Kılıf baskısı: 1 m aralıklar ile : metre m TP aabb dddd e TURKSAT ss FO OPTİK KABLO TÜRK PRYSMIAN metre m Firma Tanıtma şerit baskısı : müşteri isteğine uygun Lojistik Paketleme: Ağaç makaralarda. Sevk uzunluğu: 2000 m ± 5% m PRYSMIAN 2015, All Rights Reserved All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian: any modification or alteration afterwards of product may give different result. The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of Prysmian. The information is believed to be correct at the time of issue. Prysmian reserves the right to amend this specification without prior notice. This specification is not contractually valid unless specifically authorised by Prysmian. Merkez tüplü TF10011-FTL1 KEF5E-014 www.prysmiangroup.com Issued 2015-10-01 BS / Page 2 of 2
TF10014 A-DF(ZN)(SR)2Y Bina dışı döşeme şartlarına uygun fiber optik Kablo Kablo Tasarımı - Örnek içindir, karşılaştırma yapılamaz - Merkez eleman (GRP): Sentetik elyafdan üretilmiş plastik destekli, ihtiyaç duyulması halinde PE kaplanabilir Fiber tüpler: Tek kat PBTP, tüplerin içersi uygun bir dolgu malzemesi ile doldurulacaktır (Min. kalınlık 0.3 mm) Eğirme: Fiber tüpler merkez elemanı etrafına SZ yöntemi ile eğrilecektir. Boylamasına su sızdırmazlık : Kablo özü uygun bir dolgu malzemesi ile doldurulacaktır. Güçlendirme elemanları : Aramid iplikler Zırh: Her iki tarafı kopolimer kaplı korige çelik bant. Zırh altına bir adet boylamasına firma tanıtma şeridi ve iki adet karşılıklı yırtma ipi verilecektir Dış kılıf : Turuncu renkli orta yoğunluklu polietilen (MDPE) Yer altı fiber optik kablo boruda veya direk toprak altına döşemeye uygun Teknik Özellikler Fiber sayısı 12 24 96-144 216 Tasarım 3 x 4E 6 x 4E 8 x 12E-12x12E 1. Kat : 6x12E 2.kat : 12x12E Tüp - Ø mm 2.1 2.1 2.4 2.4 GRP mm 2.2 2.2 2.7/4.3-3.0/7.4 2.6 Dış kılıf kalınlık mm 2.2 ± 0.2 mm (zırh ile birlikte) Kablo çapı mm 12.6 12.6 15.3-18.1 18.5 Kablo ağırlığı kg / km 157 157 231-309 334 Maks. montaj gerilimi N 1.5 * W [N], (min. 2700) Minimum Bükme Yarıçapları mm Sıcaklık aralığı C Döşeme -20 -> +60; Statik 15 x Cable-Ø Taşıma & Depolama -40 -> +70 ; Dinamik 20 x Cable-Ø Çalışma -40 -> +70 Mekaniksel ve Çevresel Özellikler Test Standard Şartname değeri Kabul şartı * Maks. montaj gerilimi IEC 60794-1-2-E1 1.5 * W [N], (min. 2700) Δα çevrilebilir, fiber uzaması 0.33% Maks. işletme gerilimi IEC 60794-1-2-E1 0.5 * W [N], (min. 900) fiber uzaması yok, Δα 0.05 db Ezme IEC 60794-1-2-E3 4000 N / 100 mm, (maks. 15 min) Δα 0.05 db, hasar olmayacak Darbe IEC 60794-1-2-E4 30 Nm, 3 darbe, R= 300 mm Δα 0.05 db testten sonra Burulma IEC 60794-1-2-E7 100N, +/- 180, 10 tur Δα 0.05 db, hasar olmayacak Tekrar Bükme IEC 60794-1-2-E6 R=20x D, 100 N, 35 tur hasar olmayacak Kablo bükme IEC 60794-1-2-E11 R=20x D, 4 dönüs, 3 tur Δα 0.05 db, hasar olmayacak Klima IEC 60794-1-2-F1-40 C ile +70 C 0.05 db /km Su sızdırmazlık IEC 60794-1-2-F5B numune=1m, su sütünu=1m 24 saat sonra su sızdırmazlığı * Testler sırasında tüm optik ölçümler 1550 nm de yapılacak Optik Özellikler Optik özellikler için lütfen fiber veri sayfasını dikkate alınız Loose tube TF10014-A-DF(ZN)(SR)2Y-029 www.prysmiangroup.com Issued 2013-05-16 BS / Page 1 of 2
TF10014 A-DF(ZN)(SR)2Y Renklendirme ve Tanımlamalar Tüpler TÜRKSAT şartnamesine uygun olacaktır Fibre Renklendirme TÜRKSAT şartnamesine uygun olacaktır Kör damarlar naturel veya beyaz renkli olacaktır Dış kılıf renk: Portakal Kablo baskıları Firma tanıtma şeridi baskısı : TÜRK PRYSMIAN aayyyy ss FO-Y OPTİK KABLO dddd TÜRKSAT A.Ş. Kılıf baskısı 1 m aralıklar ile aşağıdaki şekilde: metre m TP aabb dddd e TURKSAT ss FO OPTİK KABLO TÜRK PRYSMIAN metre m TP: Üretici aa: Üretim ayı bb: Üretim yılı (son iki rakam) yyyy : Üretim yılı dddd : Kablo öz numarası e : Özden üretilmiş kablo numarası, ss : fiber sayısı Lojistik Paketleme : Ağaç makaralarda. Sevk uzunluğu: Standart sevk uzunluğu 2km ± % 5 PRYSMIAN 2013, All Rights Reserved All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian: any modification or alteration afterwards of product may give different result. The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of Prysmian. The information is believed to be correct at the time of issue. Prysmian reserves the right to amend this specification without prior notice. This specification is not contractually valid unless specifically authorised by Prysmian. Loose tube TF10014-A-DF(ZN)(SR)2Y-029 www.prysmiangroup.com Issued 2013-05-16 BS / Page 2 of 2
KOAKSİYEL BAKIR KABLOLAR Fokabeks Kablo ve Sistemleri Limited Şirketi Ataşehir Bulvarı 38. Ada Ata 3/3 Plaza Kat:6 No:60 Ataşehir 34758 İstanbul Tel: +90 216 456 91 38 39 Faks: +90 216 456 91 41 www.focabex.com
Coax4 CT 22 S (2.2/8.8) LWT CATV Trunk Cable Application CATV cables are used in trunk lines of CATV and broadband networks between headend and subscriber termination point. They are suitable for direct buried and duct laying. Coax LWT types are Longitudinal Water Tight. Standards EN 50117-2-3, further EN 50083-2/A1, EN 50117-1 EN50289-4-2 method B; Flame resistance IEC 60332-1 (not for cables with PE sheath) Construction Inner conductor Insulation Outer conductor Sheath Printing bare copper wire, diameter 2.2 mm gas injected foam PE, diameter 8.8 mm welded copper tube, diameter 9.5 mm PE, LWT (Longitudinal Water Tight), diameter 12.3 ± 0.3 mm black Mechanical properties Minimum bending radius without load 10 x D ( D= outer diameter ) with load 15 x D ( D= outer diameter ) Temperature range during operation - 40 C to + 70 C during storage - 40 C to + 70 C during installation - 5 C to + 60 C Longitudinal water tightness according to EN 50289-4-2 method B 3m sample, water height 1m, 24h LINKING THE FUTURE www.prysmiangroup.com Coax4 CT 22 S LWT_e Version 1.0 17.06.2010 Page 1 of 2
Coax4 CT 22 S (2.2/8.8) LWT Electrical properties at 20 C DC resistance Inner conductor 4.8 /km Outer conductor 2.6 /km Mutual capacitance 50 pf/m Characteristic impedance 75 ± 2 Velocity ratio 88 % Screening attenuation 30 MHz 1000 MHz > 120 db Screening Class A++ Transfer impedance 5 MHz 30 MHz < 0.8 m /m Screening Class A++ Electrical strength Dielectric 2 kv DC 1 min Sheath 3.75 kv DC 1 min Electrical data at 20 C Attenuation (db/100m) Return loss (db) acc. to EN 50117-2-3 Frequency (MHz) Frequency (MHz) nominal 5 0.65 5 30 > 26 50 2.0 30 470 > 26 100 2.9 470 1000 > 23 200 4.2 400 6.0 800 8.7 862 9.1 950 9.6 1350 11.3 1750 13.3 2150 15.1 3000 18.0 Technical data Product code Cable type Weigh t Standard delivery length Drum size Coppe r conte nt Tensil e force Bending radius kg/km m *OWD N mm Storage 60016694 Coax4 CT 22 S PE LWT 170 1000 1250/630/67 0 110 500 125 outside *OWD (one-way drum) [PRODUCT CODE TABLE] PRYSMIAN GROUP 2010, All Rights Reserved All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian Group: any modification or alteration afterwards of product may give different result. The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of Prysmian Group. The information is believed to be correct at the time of issue. Prysmian Group reserves the right to amend this specification without prior notice. This specification is not contractually valid unless specifically authorised by Prysmian Group. LINKING THE FUTURE www.prysmiangroup.com Coax4 CT 22 S LWT_e Version 1.0 17.06.2010 Page 2 of 2
Coax4 CT 22 S (2.2/8.8) with messenger CATV Aerial Cable Application CATV cables with messenger element are used as aerial cables in CATV and broadband networks between headend and subscriber termination point. They are suitable for direct exposure to sun and rain and also for direct buried and duct laying. Standards Screening Class A++ acc. to EN 50117-2-3, further EN 50083-2/A1, EN 50117-1 Construction Inner conductor Insulation Outer conductor Sheath Suspension wire Printing Mechanical properties bare copper wire, diameter 2.2 mm gas injected foam PE, diameter 8.8 mm welded copper tube, diameter 9.5 mm element sheath:pe, diameter 12.3 ± 0.3 mm, black overall sheath: PE, figure-8 with messenger, black, dimension approx. 13.7 mm x 22.2 mm Stranded galvanized steel wires, 7 x 1.0 mm, diameter 3.0 mm Minimum bending radius without load 10 x D ( D= outer diameter ) with load 15 x D ( D= outer diameter ) Temperature range during operation - 40 C to + 70 C Minimum breaking strength of suspension wire during storage during installation - 40 C to + 70 C - 5 C to + 60 C 7160 N LINKING THE FUTURE www.prysmiangroup.com Coax4_CT_22_Smessenger_e Version 2.0 10.062013 Page 1 of 3
Coax4 CT 22 S (2.2/8.8) with messenger Electrical properties at 20 C DC resistance Inner conductor 4.8 /km Outer conductor 2.6 /km Mutual capacitance 50 pf/m Characteristic impedance 75 ± 2 Velocity ratio 88 % Screening factor 30 MHz 1000 MHz > 120 db Transfer impedance 5 MHz 30 MHz < 0.8 m /m Electrical strength Dielectric 2 kv DC 1 min Sheath 3.75 kv DC 1 min Electrical data at 20 C Attenuation (db/100m) Return loss (db) Frequency (MHz) Frequency (MHz) nominal 5 0.65 5 30 > 26 50 2.0 30 470 > 26 100 2.9 470 1000 > 23 200 4.2 400 6.0 800 8.7 862 9.1 950 9.6 1350 11.3 1750 13.3 2150 15.1 3000 18.0 LINKING THE FUTURE www.prysmiangroup.com Coax4_CT_22_Smessenger_e Version 2.0 10.062013 Page 2 of 3
Coax4 CT 22 S (2.2/8.8) with messenger Technical data Product code Cable type Weight Standard Drum size Copper Tensile Bending delivery length content force radius Kg/km m *OWD N mm Storage 1003606 60016728 Coax4 CT 22 S TS PE bk 270 1000 1200/800/69 4 110 2300 125 outside *OWD (one-way drum) D E Diameter in mm 2.2/8.8-TS Inner conductor 2.2 C B Insulation 8.8 Outer conductor (F) 9.5 Sheath (G) 13.7 A Bridge height (B) 3.0 Bridge width (C) 2.5 G Suspension wire (E) 3.0 Wire sheath (D) 5.5 Total (A) 22.2 F [PRODUCT CODE TABLE] PRYSMIAN GROUP 2011, All Rights Reserved All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian Group: any modification or alteration afterwards of product may give different result. The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of Prysmian Group. The information is believed to be correct at the time of issue. Prysmian Group reserves the right to amend this specification without prior notice. This specification is not contractually valid unless specifically authorised by Prysmian Group. LINKING THE FUTURE www.prysmiangroup.com Coax4_CT_22_Smessenger_e Version 2.0 10.062013 Page 3 of 3
Coax3 CT 33 S (3.3/13.5) LWT CATV Trunk Cable Application CATV cables are used in trunk lines of CATV and broadband networks between headend and subscriber termination point. They are suitable for direct buried and duct laying. Coax LWT types are Longitudinal Water Tight. Standards EN 50117-2-3, further EN 50083-2/A1, EN 50117-1 EN50289-4-2 method B; Flame resistance IEC 60332-1 (not for cables with PE sheath) Construction Inner conductor Insulation Outer conductor Sheath Printing bare copper wire, diameter 3.3 mm gas injected foam PE, diameter 13.3 mm welded copper tube, diameter 14.1 mm PE, LWT (Longitudinal Water Tight), diameter 17.1 mm ± 0.5 mm black Mechanical properties Minimum bending radius without load 10 x D ( D= outer diameter ) with load 15 x D ( D= outer diameter ) Temperature range during operation - 40 C to + 70 C during storage - 40 C to + 70 C during installation - 5 C to + 60 C Longitudinal water tightness according to EN 50289-4-2 method B 3m sample, water height 1m, 24h LINKING THE FUTURE www.prysmiangroup.com Coax3 CT 33 S LWT_e Version 1.0 17.06.2010 Page 1 of 2
Coax3 CT 33 S (3.3/13.5) LWT Electrical properties at 20 C DC resistance Inner conductor 2.1 /km Outer conductor 1.7 /km Mutual capacitance 50 pf/m Characteristic impedance 75 ± 1.5 Velocity ratio 88 % Screening attenuation 30 MHz 1000 MHz > 120 db Screening Class A++ Transfer impedance 5 MHz 30 MHz < 0.8 m /m Screening Class A++ Electrical strength Dielectric 2 kv DC 1 min Sheath 3.75 kv DC 1 min Electrical data at 20 C Attenuation (db/100m) Return loss (db) acc. to EN 50117-2-3 Frequency (MHz) Frequency (MHz) nominal 5 0.4 5 30 > 26 50 1.3 30 470 > 26 100 1.9 470 1000 > 23 200 2.7 400 4.0 800 5.8 862 6.0 950 6.3 1350 7.7 1750 8.9 2150 10.1 3000 12.0 Technical data Product code Cable type Weigh t Standard delivery length Drum size Coppe r conte nt Tensil e force Bending radius kg/km m *OWD N mm Stora ge 60016693 Coax3 CT 33 S PE LWT 290 1000 1200/600/71 0 195 500 175 outsid e *OWD (Oneway drum) [PRODUCT CODE TABLE] PRYSMIAN GROUP 2010, All Rights Reserved All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian Group: any modification or alteration afterwards of product may give different result. The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of Prysmian Group. The information is believed to be correct at the time of issue. Prysmian Group reserves the right to amend this specification without prior notice. This specification is not contractually valid unless specifically authorised by Prysmian Group. LINKING THE FUTURE www.prysmiangroup.com Coax3 CT 33 S LWT_e Version 1.0 17.06.2010 Page 2 of 2
Coax3 CT 33 S TS (3.3/13.5) CATV Trunk Cable with suspension wire Application CATV cables are used in trunk lines of CATV and broadband networks between headend and subscriber termination point. Standards Screening Class A++ acc. to EN 50117-2-3, further EN 50083-2/A1, EN 50117-1 Flame resistance IEC 60332-1 (not for cables with PE sheath) Construction Inner conductor Insulation Outer conductor 1. Sheath 2. Sheath Suspension wire Printing bare copper wire, diameter 3.3 mm gas injected foam PE, diameter 13.3 mm welded copper tube, diameter 14.1 mm PE, diameter 17.1 mm ± 0.5 mm, colour black RAL 9005 PE, diameter 18.8 mm x 29.2 mm Stranded galvanized steel wires, 19 x 1.0 mm, diameter 5.0 mm Mechanical properties Minimum bending radius without load 10 x D ( D= outer diameter ) with load 15 x D ( D= outer diameter ) Temperature range during operation - 40 C to + 70 C during storage - 40 C to + 70 C during installation - 5 C to + 60 C Minimum breaking strength of suspension wire 18000 N LINKING THE FUTURE www.prysmiangroup.com Coax3_CT_33_S_messenger_e Version 2.0 10.06.2013 Page 1 of 3
Coax3 CT 33 S TS (3.3/13.5) Electrical properties at 20 C DC resistance Inner conductor 2.1 /km Outer conductor 1.7 /km Mutual capacitance 50 pf/m Characteristic impedance 75 ± 1.5 Velocity ratio 88 % Screening factor 30 MHz 1000 MHz > 120 db Transfer impedance 5 MHz 30 MHz < 0.8 m /m Electrical strength Dielectric 2 kv DC 1 min Sheath 3.75 kv DC 1 min Electrical data at 20 C Attenuation (db/100m) Return loss (db) Frequency (MHz) Frequency (MHz) nominal 5 0.4 5 30 > 26 50 1.3 30 470 > 26 100 1.9 470 1000 > 23 200 2.7 400 4.0 800 5.8 862 6.0 950 6.3 1350 7.7 1750 8.9 2150 10.1 3000 12.0 LINKING THE FUTURE www.prysmiangroup.com Coax3_CT_33_S_messenger_e Version 2.0 10.06.2013 Page 2 of 3
Coax3 CT 33 S TS (3.3/13.5) Technical data Product code Cable type Weight Standar d delivery length Drum size Copper content Maximum tensile force of suspension wire Bending radius kg/km m *OWD N mm Storage 1014244 60009202 Coax3 CT 33 S TS PE bk 506 1000 1400/710/96 0 195 6000 200 outside *OWD (Oneway drum) D E Diameter in mm 3.3/13.3-TS C B Inner conductor 3.3 Insulation 13.3 G A Outer conductor (F) 14.1 Sheath (G) 18.8 Bridge height (B) 2.5 Bridge width (C) 5.0 Suspension wire (E) 5.0 Wire sheath (D) 8.0 F Total (A) 29.2 [PRODUCT CODE TABLE] PRYSMIAN GROUP 2009, All Rights Reserved All sizes and values without tolerances are reference values. Specifications are for product as supplied by Prysmian Group: any modification or alteration afterwards of product may give different result. The information contained within this document must not be copied, reprinted or reproduced in any form, either wholly or in part, without the written consent of Prysmian Group. The information is believed to be correct at the time of issue. Prysmian Group reserves the right to amend this specification without prior notice. This specification is not contractually valid unless specifically authorised by Prysmian Group. LINKING THE FUTURE www.prysmiangroup.com Coax3_CT_33_S_messenger_e Version 2.0 10.06.2013 Page 3 of 3
KOAKSİYEL ALÜMİNYUM KABLOLAR Fokabeks Kablo ve Sistemleri Limited Şirketi Ataşehir Bulvarı 38. Ada Ata 3/3 Plaza Kat:6 No:60 Ataşehir 34758 İstanbul Tel: +90 216 456 91 38 39 Faks: +90 216 456 91 41 www.focabex.com
TFC Coaxial Cable Product Information Sheet Type: TX10715JB 715 Series Coaxial Cable Copper Clad Aluminum Conductor Foamed Polyethylene Dielectric Seamless Aluminum Tube Outer Conductor Underground Floodant Medium Density Polyethylene Jacket Cable Ordering Information Part Number Description NEC / CSA Listing 750715JB00BK001 TX10715JB n/a 25G02 Characteristics Material Detail inches mm Inner Conductor Copper Clad Aluminum 0.166 4.22 Dielectric Foamed Polyethylene 0.686 17.4 Outer Conductor Seamless Aluminum Tube 0.715 18.2 Floodant Underground 0.725 18.4 Jacket Polyethylene, Outdoor, Black 0.785 19.9 Messenger --- --- --- Cable Width --- --- --- Mechanical Specifications Minimum Bend Radius, in. (mm) 6.5 ( 165) Product Weight, lbs/kft (kg/km) (less reel) 148 ( 220) Customers are reminded that they are SOLELY responsible for confirming that all products are properly installed and used in accordance with all applicable codes and regulations. Document: tx10715jb_1ghz10.doc Revision: 9.14.2010 Page: 1 of 2 uncontrolled copy All Rights Reserved, Specifications subject to change without notice Times Fiber Communications, Inc. 358 Hall Avenue P.O. Box 384 Wallingford, CT 06492 Phone +1-800-677-2288 Fax +1-203-265-8422 http://www.timesfiber.com
TFC Coaxial Cable Product Information Sheet Type: TX10715JB Electrical Specifications Impedance, Ω 75 ± 2 Velocity of Propagation, % 88 Capacitance, Nominal 15.3 pf/ft 50.0 pf/m DC Resistance Ω / kft Ω / km Inner Conductor 0.58 1.90 Outer Conductor 0.42 1.38 Loop 1.00 3.28 Notes: Attenuation, Maximum @ 68 F (20 C) Frequency, MHz db / 100 ft db / 100 m 5 0.11 0.36 55 0.36 1.18 211 0.74 2.43 250 0.81 2.66 270 0.84 2.76 300 0.89 2.92 330 0.94 3.08 350 0.97 3.18 400 1.05 3.44 450 1.12 3.67 500 1.19 3.90 550 1.25 4.10 600 1.31 4.30 750 1.49 4.89 870 1.63 5.35 1000 1.75 5.74 Customers are reminded that they are SOLELY responsible for confirming that all products are properly installed and used in accordance with all applicable codes and regulations. Document: tx10715jb_1ghz10.doc Revision: 9.14.2010 Page: 2 of 2 uncontrolled copy All Rights Reserved, Specifications subject to change without notice Times Fiber Communications, Inc. 358 Hall Avenue P.O. Box 384 Wallingford, CT 06492 Phone +1-800-677-2288 Fax +1-203-265-8422 http://www.timesfiber.com
TFC Coaxial Cable Product Information Sheet Type: TX10715MS / 188 MESS 715 Series Coaxial Cable Copper Clad Aluminum Conductor Foamed Polyethylene Dielectric Seamless Aluminum Tube Outer Conductor Medium Density Polyethylene Jacket 0.188" Galvanized Steel Messenger Cable Ordering Information Part Number Description NEC / CEC Listing 750715MS00BK110 TX10715MS / 188 MESS n/a 25G05 Characteristics Material Detail inches mm Inner Conductor Copper Clad Aluminum 0.166 4.22 Dielectric Foamed Polyethylene 0.686 17.4 Outer Conductor Seamless Aluminum Tube 0.715 18.2 Floodant --- --- --- Jacket Polyethylene, Outdoor, Black 0.785 19.9 Messenger Galvanized Steel, Stranded 0.188 4.78 Cable Width --- 1.200 30.5 Mechanical Specifications Minimum Bend Radius, in. (mm) 5.0 ( 127) Product Weight, lbs/kft (kg/km) (less reel) 291 ( 433) Customers are reminded that they are SOLELY responsible for confirming that all products are properly installed and used in accordance with all applicable codes and regulations. Document: tx10715ms-188m_1ghz10.doc Revision: 9.9.2010 Page: 1 of 2 uncontrolled copy All Rights Reserved, Specifications subject to change without notice Times Fiber Communications, Inc. 358 Hall Avenue P.O. Box 384 Wallingford, CT 06492 Phone +1-800-677-2288 Fax +1-203-265-8422 http://www.timesfiber.com
TFC Coaxial Cable Product Information Sheet Type: TX10715MS / 188 MESS Electrical Specifications Impedance, Ω 75 ± 2 Velocity of Propagation, % 88 Capacitance, Nominal 15.3 pf/ft 50.0 pf/m DC Resistance Ω / kft Ω / km Inner Conductor 0.58 1.90 Outer Conductor 0.42 1.38 Loop 1.00 3.28 Notes: Attenuation, Maximum @ 68 F (20 C) Frequency, MHz db / 100 ft db / 100 m 5 0.11 0.36 55 0.36 1.18 211 0.74 2.43 250 0.81 2.66 270 0.84 2.76 300 0.89 2.92 330 0.94 3.08 350 0.97 3.18 400 1.05 3.44 450 1.12 3.67 500 1.19 3.90 550 1.25 4.10 600 1.31 4.30 750 1.49 4.89 870 1.63 5.35 1000 1.75 5.74 Customers are reminded that they are SOLELY responsible for confirming that all products are properly installed and used in accordance with all applicable codes and regulations. Document: tx10715ms-188m_1ghz10.doc Revision: 9.9.2010 Page: 2 of 2 uncontrolled copy All Rights Reserved, Specifications subject to change without notice Times Fiber Communications, Inc. 358 Hall Avenue P.O. Box 384 Wallingford, CT 06492 Phone +1-800-677-2288 Fax +1-203-265-8422 http://www.timesfiber.com
TFC Coaxial Cable Product Information Sheet Type: TX10540JB 540 Series Coaxial Cable Copper Clad Aluminum Conductor Foamed Polyethylene Dielectric Seamless Aluminum Tube Outer Conductor Underground Floodant Medium Density Polyethylene Jacket Cable Ordering Information Part Number Description NEC / CSA Listing 750540JB00BK001 TX10540JB n/a 25E02 Characteristics Material Detail inches mm Inner Conductor Copper Clad Aluminum 0.124 3.15 Dielectric Foamed Polyethylene 0.513 13.0 Outer Conductor Seamless Aluminum Tube 0.540 13.7 Floodant Underground 0.550 14.0 Jacket Polyethylene, Outdoor, Black 0.610 15.5 Messenger --- --- --- Cable Width --- --- --- Mechanical Specifications Minimum Bend Radius, in. (mm) 4.0 ( 102) Product Weight, lbs/kft (kg/km) (less reel) 94 ( 140) Customers are reminded that they are SOLELY responsible for confirming that all products are properly installed and used in accordance with all applicable codes and regulations. Document: tx10540jb_1ghz10.doc Revision: 5.26.2010 Page: 1 of 2 uncontrolled copy All Rights Reserved, Specifications subject to change without notice Times Fiber Communications, Inc. 358 Hall Avenue P.O. Box 384 Wallingford, CT 06492 Phone +1-800-677-2288 Fax +1-203-265-8422 http://www.timesfiber.com
TFC Coaxial Cable Product Information Sheet Type: TX10540JB Electrical Specifications Impedance, Ω 75 ± 2 Velocity of Propagation, % 88 Capacitance, Nominal 15.3 pf/ft 50.0 pf/m DC Resistance Ω / kft Ω / km Inner Conductor 1.02 3.35 Outer Conductor 0.59 1.94 Loop 1.61 5.29 Notes: Attenuation, Maximum @ 68 F (20 C) Frequency, MHz db / 100 ft db / 100 m 5 0.14 0.46 55 0.47 1.54 211 0.95 3.12 250 1.03 3.38 270 1.07 3.51 300 1.13 3.71 330 1.19 3.90 350 1.23 4.04 400 1.32 4.33 450 1.40 4.59 500 1.49 4.89 550 1.56 5.12 600 1.64 5.38 750 1.85 6.07 870 2.01 6.59 1000 2.17 7.12 Customers are reminded that they are SOLELY responsible for confirming that all products are properly installed and used in accordance with all applicable codes and regulations. Document: tx10540jb_1ghz10.doc Revision: 5.26.2010 Page: 2 of 2 uncontrolled copy All Rights Reserved, Specifications subject to change without notice Times Fiber Communications, Inc. 358 Hall Avenue P.O. Box 384 Wallingford, CT 06492 Phone +1-800-677-2288 Fax +1-203-265-8422 http://www.timesfiber.com
TFC Coaxial Cable Product Information Sheet Type: TX10540MS / 109 MESS 540 Series Coaxial Cable Copper Clad Aluminum Conductor Foamed Polyethylene Dielectric Seamless Aluminum Tube Outer Conductor Medium Density Polyethylene Jacket 0.109" Galvanized Steel Messenger Cable Ordering Information Part Number Description NEC / CSA Listing 750540MS00BK007 TX10540MS / 109 MESS n/a 25E05 Characteristics Material Detail inches mm Inner Conductor Copper Clad Aluminum 0.124 3.15 Dielectric Foamed Polyethylene 0.513 13.0 Outer Conductor Seamless Aluminum Tube 0.540 13.7 Floodant --- --- --- Jacket Polyethylene, Outdoor, Black 0.610 15.5 Messenger Galvanized Steel 0.109 2.77 Cable Width --- 0.975 24.8 Mechanical Specifications Minimum Bend Radius, in. (mm) 4.0 ( 102) Product Weight, lbs/kft (kg/km) (less reel) 137 ( 204) Customers are reminded that they are SOLELY responsible for confirming that all products are properly installed and used in accordance with all applicable codes and regulations. Document: tx10540ms-109mess_1ghz09.doc Revision: 7.13.2009 Page: 1 of 2 uncontrolled copy All Rights Reserved, Specifications subject to change without notice Times Fiber Communications, Inc. 358 Hall Avenue P.O. Box 384 Wallingford, CT 06492 Phone +1-800-677-2288 Fax +1-203-265-8422 http://www.timesfiber.com
TFC Coaxial Cable Product Information Sheet Type: TX10540MS / 109 MESS Electrical Specifications Impedance, Ω 75 ± 2 Velocity of Propagation, % 88 Capacitance, Nominal 15.3 pf/ft 50.0 pf/m DC Resistance Ω / kft Ω / km Inner Conductor 1.02 3.35 Outer Conductor 0.59 1.94 Loop 1.61 5.29 Notes: Attenuation, Maximum @ 68 F (20 C) Frequency, MHz db / 100 ft db / 100 m 5 0.14 0.46 55 0.47 1.54 211 0.95 3.12 250 1.03 3.38 270 1.07 3.51 300 1.13 3.71 330 1.19 3.90 350 1.23 4.04 400 1.32 4.33 450 1.40 4.59 500 1.49 4.89 550 1.56 5.12 600 1.64 5.38 750 1.85 6.07 870 2.01 6.59 1000 2.17 7.12 Customers are reminded that they are SOLELY responsible for confirming that all products are properly installed and used in accordance with all applicable codes and regulations. Document: tx10540ms-109mess_1ghz09.doc Revision: 7.13.2009 Page: 2 of 2 uncontrolled copy All Rights Reserved, Specifications subject to change without notice Times Fiber Communications, Inc. 358 Hall Avenue P.O. Box 384 Wallingford, CT 06492 Phone +1-800-677-2288 Fax +1-203-265-8422 http://www.timesfiber.com
TFC Coaxial Connector Information Sheet Type: QC II Series 6 Universal, NiSn, QuickShield F-Type Compression Connector Series 6: Universal Design Nickel-Tin (NiSn) Plating TFC QuickShield Feature (patent pending) Part Numbers: TFC-QC2NSQS-06U-3 TriShield, &QuadShield) (Standard & Features Standard 0.300 0.250 Cable Preparation using Industry Standard Preparation Tools Connector Characteristics TFC QC II Compression F-Type Electrical Specifications Limits Results Return Loss ANSI/SCTE 123 2006 Telcordia GR-1503 3.5.4 > 30 db (5-1000 MHz) Meets or Exceeds Insertion Loss Telcordia GR-1503 3.5.3 < 0.1 db (to 350 MHz) Meets or Exceeds < 0.1 db (to 700 MHz) Meets or Exceeds < 0.1 db (to 1 GHz) Meets or Exceeds Customers are reminded that they are SOLELY responsible for confirming that all products are properly installed and used in accordance with all applicable codes and regulations. Document: tfc-qc2nsqs-06u-3_20110301.doc Revision: 3.1.2011 Page: 1 of 2 uncontrolled copy All Rights Reserved, Specifications subject to change without notice Times Fiber Communications, Inc. 358 Hall Avenue P.O. Box 384 Wallingford, CT 06492 Phone +1-800-677-2288 Fax +1-203-265-8422 http://www.timesfiber.com TFCjumpers@timesfiber.com
TFC Coaxial Connector Information Sheet Type: QC II Series 6 Universal, NiSn, QuickShield Connector Characteristics TFC QC II Compression F-Type Electrical Specifications Limits Results Shielding Effectiveness Telcordia GR-1503 3.5.5 > 95 db ( to 300 MHz) Meets or Exceeds > 70 db ( to 1 GHz) Meets or Exceeds Screening Attenuation EN 50289-1-6 / IEC 62153-4-7 > 80 db (5 MHz - 3.0 GHz) Reference Information Dielectric Strength Telcordia GR-1503 3.5.2 > 1.0 kvac for 1 minute Meets or Exceeds Insulation Resistance Telcordia GR-1503 3.5.1 > 5000 Meg-Ω@ 100 VDC Meets or Exceeds Mechanical Specifications Specifications Limits Results Corrosion Resistant ANSI/SCTE 123 2006 1000 hours Meets or Exceeds Cable Application Telcordia GR-1503 3.2.2 < 20 lbf Insertion Force Meets or Exceeds Cable Interface Telcordia GR-1503 3.2.3 > 40 lbf Pull Force Meets or Exceeds Equipment Interface Telcordia GR-1503 3.2.4 > 10 Matings w/o Damage Meets or Exceeds > 60 in lbs w/o Damage Meets or Exceeds Temperature Cycling with Humidity Telcordia GR-1503 4.1 70 F to 140 F to -40 F Meets or Exceeds Must pass 3.2.3 spec after 7 days Loosening Torque Telcordia GR-1503 4.2 > 30 in lbs after 3 days of 4.1 Meets or Exceeds Moisture Migration ANSI/SCTE 64 2004 No Dye Penetration Meets or Exceeds Salt Fog Telcordia GR-1503 4.4, 1000 hrs Return Loss > 30 db @ 1 GHz Meets or Exceeds Environmental Pollutants Telcordia GR-1503 4.5 Return Loss > 30 db @ 1 GHz Meets or Exceeds Vibration Telcordia GR-1503 4.6 Loosening Torque > 32 in lbs Meets or Exceeds Chemical Resistance Outdoor 1 Telcordia GR-1503 4.7 7 Days Exposure Meets or Exceeds UV Degradation 1 Telcordia GR-1503 4.8 7 Days Exposure Meets or Exceeds Ozone Degradation 1 Telcordia GR-1503 4.10 70 Hour Exposure Meets or Exceeds Note 1: Connectors will not exhibit cracking, swelling, or brittleness. Customers are reminded that they are SOLELY responsible for confirming that all products are properly installed and used in accordance with all applicable codes and regulations. Document: tfc-qc2nsqs-06u-3_20110301.doc Revision: 3.1.2011 Page: 2 of 2 uncontrolled copy All Rights Reserved, Specifications subject to change without notice Times Fiber Communications, Inc. 358 Hall Avenue P.O. Box 384 Wallingford, CT 06492 Phone +1-800-677-2288 Fax +1-203-265-8422 http://www.timesfiber.com TFCjumpers@timesfiber.com