Renice R-SATA Storage Solution for Aerospace and Defense Application
The Aerospace and Defense Industries: Unique Challenges Aerospace and Defense storage applications require the highest level of reliability,often operating in harsh environments. The Flash storage devices used in these applications must therefore operate flawlessly while exposed to extreme temperatures and high mechanical shock and vibration loads. SATA Gold finger Connector can not cater to this challenge!
The Fatal Weakness of SATA Gold finger The gold finger adopts flat structure, male connector and female connector contact through the plane, inevitably there will be momentary bad contacts during heavy shock and vibration, and the bad contacts may cause system crash or even damage the SSD due to frequent abnormal power loss. So, you need a solution on the highest reliability and WE HAVE! The intense shock may result in drag and malposition between male and female connectors. The gold finger uses fixed structure with no any buffer design, thus it is likely to be damaged by violent drag causing by intense shock.
RENICE R-SATA Connector R-SATA, or Rugged SATA in short, is the unique interface that has been designed specifically to address vibration and the shock problem during application. It can efficiently resolve the undesirable intermittent contact or potential signal spikes resulting from vibration and shock in the SATA gold finger connector.
X9 R-SATA Product Features r-back Up Technology & Quick Erase polymer tantalum Capacitor Secure Erase Button Physical Destruction & Logical Destruction SATA 6Gbps Capacity 2TB (MLC) R/W 550/500MB/s R/W IOPS 60K/70K Low power consumption Shock and vibration resistance Over Voltage Protection Quick Erase r-backup Power-down Protection Technology Operation Temp.: -40 C to +85 C Rugged Case Customization based on Renice own controller Rugged Case (optional)
Product Specifications Product Interface Controller X9 2.5" R-SATA 3 SSD 7+15 Pin R-SATA 3 (6.0Gbps) RS3502-IT Performance Max Sequential R/W 550/500 MB/s Access Time < 0.1ms Dimension 100.0mm X 70.0mm X 9.0mm Software & Management S.M.A.R.T TRIM Power-down Protection Secure Erase Over Voltage Protection Physical Destruction Write Protect AES Encryption (256bit) Reliability MTBF >3,500,000 hours ECC Wear Leveling BCH ECC 80bits in 1KBytes Static & Dynamic Environment Vibration 20G (7-2000HZ) Shock Humidity 5-95% 1,500G (@0.5ms half sine wave) Operating Temp. Storage Temp. -40 C to +85 C -50 C to +95 C Input Voltage 5V (±5%)
Company Introduction Company Introduction Founded in 2008, Renice is dedicated to collaborating with customers and partners to develop and manufacture the first-rate flash based storage. Renice SSDs deliver high performance and reliability in mission-critical applications in the industrial, enterprise, embedded, automotive, and military markets. Renice has its own controller patents and can provide reliable solutions which be customized on request to suit different applications with regard to power protection, encryption support, secure erase and longterm supply. Add: Room 1101, B2 Block, KeXing Science Park, NanShan High-Tech Park, 518057, ShenZhen, China Tel: 86 755 83258725 Fax: 86 755 83257295 Email: sales@renice-tech.com Website: http://www.renice-tech.com