GRASS CBS Jeodezik Projeksiyonlar Geodetic Projections GRASS GIS
Jeodezi: Yerküre nin ölçümü, matematiksel olarak ifade edilmesi ve modellenmesine odaklı bir yerbilimleri dalıdır. Geodesy: a branch of earth sciences that deal with the measurement and modeling of the Earth. Jeodezik ölçümler koordinat sistemlerine ve referans ağlarına dayanır. Jeoit: Yerküre nin tüm topografik elemanlardan arındırılarak ifade edilen, daha gerçekci bir modelidir. Elipsoit: Jeoit modelin geometrik hesaplar ve referans ağları ile gridlere bölünmesidir. Geodetic measurements rely on coordinate systems and datums. Geoid: is a truer representation of the Earth due to abstraction of topographic elements. Ellipsoid: is the Geoid model that has grids based on geometric calculations and datums.
Jeoit / Geoid Elipsoit / Ellipsoid
Projeksiyon: üç boyutlu Yerküre nin iki boyutlu düzlem üstünde gösterilebilmesi için gerekli olan matematiksel işlemler dizisidir. Harita projeksiyonları genellikle Yeryüzü nün silindirik ya da konik yüzeylere açılımı ile sonuçlanır. Onlarca projeksiyon modeli vardır: her harita bir projeksiyonun ürünüdür. Her projeksiyon belirili oranda hatalıdır. Projection: is a series of mathematical transformations that are necessary to represent threedimensional Earth on a planar surface with two dimensions. Projected maps are usually the end results of cylindrical or conical transformations. There are numerous map projections: each map is the result of a projection model. Each projection distorts the actual shape of the Earth at some level. Projeksiyon seçimi, haritanın kullanım amaçlarına göre belirlenmelidir. The choice of the projection method should follow the purpose of the map.
Universal Transverse Mercator Silindirik / Cylindrical Albers Konik / Conical Her projeksiyon Yerküre nin aşağıdaki özelliklerinden en az bir tanesini doğru olarak göstermeyi amaçlar: All projection methods aim to accurately represent at least one of the properties of the Earth listed below: Yüzey, şekil, yön, oryantasyon, mesafe, ölçek. Area, shape, direction, bearing, distance, scale.
Sıkça Kullanılan Sistemler Frequently Used Systems Enlem-Boylam Sistemi: esasen bir koordinat sistemi olan bu modelde, Dünya 180 paralel (enlem) ve 360 meridyenden (boylamdan) oluşan bölgelere ayrılmıştır. Enlem başlangıcı Ekvator, meridyen başlangıcı ise Greenwich tir. Bu sistem gerçek bir projeksiyon metodu olmadığından enlem ve boylamlar arasındaki mesafeler her yerde eşit olmaz (Ekvator da meridyenler arası uzaklık 111 km.dir). Yerküre deki bir noktanın ifadesi enlem (K) ve boylam (D) derecelerinin yanısıra rakımın da verilmesi ile gerçekleşir. Latitude-Longitude System: is a pseudo-projection that divides the Earth into 180 latitudes and 360 longitudes. The origin of latitudes is the Equator whereas the prime meridian (longitude) is at Greenwich. Since this system is not based on complex mathematical projections, there are great differences in distance between latitudes and longitudes (inter-latitude distance is 111 km on the Equator ). The reference to a point on the Earth has to have a pair of latitude (N) and longitude (E) reading along with elevation.
Enlem ve Boylam Sistemi Latitude and Longitude System UHEM için / for NCHPC: 29:01:28D, 41:06:08K, 88m.
Sıkça Kullanılan Sistemler Transvers Merkator Projeksiyonu: temelini Kartezyan sisteminin oluşturduğu bu sistemde birden fazla projeksiyon metodu kullanılır. 1940 larda Amerikan Ordusu nun İstihkam Birliği tarafından geliştirilen bu sistemde: Yerküre, kendisine Ekvator da teğet olan bir silindire izdüşümü ile ifade edilir (silindirik). TMP Dünya yı her birinde 6 derecelik boylam olan 60 bölgeye ayırır. Her bir bölgenin kendisine ait bir koordinat sistemi vardır. Bölgesel koordinat sistemleri sayesinde TMP kutup daireleri gibi en uç noktalarda bile hassas ölçümlere olanak sağlamaktadır. Frequently Used Systems Universal Transverse Mercator Projection: is based on Cartesian coordinate system where more than one projection method is employed. Developed by the US Army Corps. of Engineers in 1940s: UTM is a cylindrical representation of the Earth, where the cylinder is tangential at the Equator. UTM divides the Earth into 60 zones, each having 6 degrees of longitude. Then, within each zone, a unique coordinate system is used. Due to these zonal coordinate systems, UTM is capable of projecting surfaces at extreme points of the Earth highly accurately.
Transvers Merkator Projeksiyon Sistemi Universal Transverse Mercator Projection UHEM için / for NCHPC: Bölge / Zone 35 T, 670012.42D, 4552106.91K, 88m
Referans Ağları Geodetic Datum Referans Ağı: Yeryüzü nün değişken şekli ve rakımı hakkında bilgi sağlayan noktalardan oluşur. Referans noktaları, Elipsoit modelin hazırlanmasında kullanılır. Yerel ölçekte yüzlerce referans noktası olsa bile daha geniş alanların jeodezik ölçümleri için kullanılan birkaç referans ağı sistemi bulunmaktadır. Bunlardan en yaygın olanı WGS84 kodu ile Amerikan Savunma Bakanlığı tarafından geliştirilen ve 1987 den itibaren Doppler uydusu ile Yeryüzü nden alınan noktalardan oluşturulan ağdır. Geodetic Datum: is a network of points that provide information about the constantly changing surface geometry and elevation on the Earth. Geodetic datum is used in preparing the ellipsoid model of the Earth. Although there are hundreds of datum points at the local scale, there are few Datum Systems that cover the Earth. The most commonly used system, WGS84, was developed by the US Department of Defense in 1987 as result of Doppler satellite survey of the Earth.
WGS72 Referans Ağında Kullanılan Noktalar WGS72 Datum Points
Referans noktalarından bilinmeyenlere ulaşmak ve Jeoit modellemesi Projecting the unknown points using the geodetic datums and modeling the Geoid
Coğrafi Bilgi Sistemi Nedir? What is Geographical Information System? CBS: coğrafi ve ona bağlı her çeşit bilgiyi dijital ortamda hazırlayan, analiz eden, değiştiren, düzenleyen, saklayan ve sunan entegre bir sistemdir. Bu sistemin üç ana elemanı vardır: Haritalama, İstatiksel analiz, Veritabanı. GIS: is an integrated system that digitally captures, analyzes, manipulates, manages, stores, and presents geographical data. Such system has three components: Mapping, Statistical analyses, Database.
CBS, Coğrafi Bilgi Bilimi ile karıştırılmamalıdır. Bu ikincisi, CBS nin yaratılmasındaki tüm bilimsel ve teorik çalışmaların yapıldığı akademik bir daldır. Geomatik mühendisliği buna bir örnektir. GIS should not be confused with Geographical Information Science. GI Science is an academic field, where scientific and theoretical research that supports GIS materializes. Geomatics engineering is an example of GI Science
GRASS CBS Nedir? GRASS: 1982 yılında Amerikan Ordusu nun İstihkam Birliği tarafından geliştirilen, belli başlı tüm bilişim platformlarında çalışan, birçok dilde kullanıma hazır, 2 ve 3 boyutlu topografik analizlerde mevcut en ileri analiz yöntemlerini barındıran, Obje-bazlı analizlerde gelişme kaydeden, açık kaynak kodlu bir CBS programıdır. Bu özelliği nedeniyle, programlama dili bilen her kullanıcı potansiyel bir geliştirici rolü oynamaktadır. What is GRASS GIS? GRASS: was developed by the U.S. Army Corps. of Engineers in 1982, runs on all major computing platforms, available in many languages, offers the most advanced 2 and 3-D topographic analyses, Continuously improving vectorbased analyses, open source software. Therefore, each user that has programming knowledge, is potentially a developer of scripts in GRASS.
GRASS Python R
GRASS da Organizasyon Data Organization in GRASS Kurulum: http://mirrors.zerg.biz/grass/ index.php Installation: http://mirrors.zerg.biz/grass/ index.php GRASS da her çeşit veri dört katta toplanır: Veritabanı: GRASS ile ilgili her dosya GISDBASE veya grassdata adı verilen dosyada saklanır. GRASS ilk çalıştırma esnasında mutlaka bu dosyaya yönlendirilmelidir. Lokasyon: aynı projeksiyon ve referans sisteminde olan tüm haritaların saklandığı veri katı. Haritatakımı: Lokasyon un altında bulunan, genellikle farklı analizler amacıyla yaratılan veri katı. Metadata: Lokasyon a ait her haritanın içerdiği verilere ait dosyaların saklandığı veri katı. The organization of data in GRASS has four layers Database: The main folder that GRASS needs to run, which is called GISDBASE or grassdata. You have to direct the program to this folder after installation. Location: Contains all maps that belong to the same projection and datum. Mapset: found under the Location, usually created for specific types of analyses to contains all the maps used. Metadata: data about data files contain data about each map in the Location.